Module:Location map/data/Australia/doc
This is the documentation page for Module:Location map/data/Australia
Lua error: expandTemplate: template "coord" does not exist.
Module:Location map/data/Australia is a location map definition used to overlay markers and labels on an equirectangular projection map of Australia. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Australia":
Map definition
name = Australia- Name used in the default map caption
image = Australia location map.svg- The default map image, without "Image:" or "File:"
image1 = Australia relief map.jpg- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
image2 = Australia location map grey.svg- Alternative map image which can be displayed via the AlternativeMap parameter
top = -9- Latitude at top edge of map, in decimal degrees
bottom = -44.5- Latitude at bottom edge of map, in decimal degrees
left = 111.5- Longitude at left edge of map, in decimal degrees
right = 155- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The map displayed as image2 can be used with the AlternativeMap parameter. Examples may be found below or in the following:
- Template:Location map#Relief parameter
- Template:Location map+/relief
- Template:Location map#AlternativeMap parameter
- Template:Location map+/AlternativeMap
Precision
Longitude: from West to East this map definition covers 43.5 degrees.
- At an image width of 200 pixels, that is 0.2175 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0435 degrees per pixel.
Latitude: from North to South this map definition covers 35.5 degrees.
- At an image height of 200 pixels, that is 0.1775 degrees per pixel.
- At an image height of 1000 pixels, that is 0.0355 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Australia
| width = 200
| label = Canberra
| lat_deg=35 | lat_min=18 | lat_sec=27 | lat_dir=S
| lon_deg=149 | lon_min=07 | lon_sec=28 | lon_dir=E
}}
Location map many, using relief map (image1)
{{Location map many | Australia
| relief = yes
| width = 200
| caption = Locations in Australia
| lat1 = -12.45 | long1 = 130.83 | label1 = Darwin
| lat2 = -42.88 | long2 = 147.33 | label2 = Hobart
| lat3 = -31.95 | long3 = 115.86 | label3 = Perth
| lat4 = -27.47 | long4 = 153.03 | label4 = Brisbane
}}
Location map+, using AlternativeMap
{{Location map+ | Australia
| AlternativeMap = Australia relief map.jpg
| width = 200
| caption = Locations in Australia
| places =
{{Location map~ | Australia
| lat = -12.45 | long = 130.83 | label = Darwin
}}
{{Location map~ | Australia
| lat = -42.88 | long = 147.33 | label = Hobart
}}
{{Location map~ | Australia
| lat = -31.95 | long = 115.86 | label = Perth
}}
{{Location map~ | Australia
| lat = -27.47 | long = 153.03 | label = Brisbane
}}
}}
Location map+, using location map (grey)
{{Location map+ | Australia
| AlternativeMap = Australia location map grey.svg
| width = 200
| caption = Locations in Australia
| places =
{{Location map~ | Australia
| lat = -12.45 | long = 130.83 | label = Darwin
}}
{{Location map~ | Australia
| lat = -42.88 | long = 147.33 | label = Hobart
}}
{{Location map~ | Australia
| lat = -31.95 | long = 115.86 | label = Perth
}}
{{Location map~ | Australia
| lat = -27.47 | long = 153.03 | label = Brisbane
}}
}}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels
