Module:Location map/data/Czech Republic
Template:High-useLua error: expandTemplate: template "coord" does not exist.
Module:Location map/data/Czech Republic is a location map definition used to overlay markers and labels on an equirectangular projection map of Czech Republic. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Czech Republic":
Map definition
name = Czech Republic- Name used in the default map caption
image = Czech Republic adm location map.svg- The default map image, without "Image:" or "File:"
image1 = Relief Map of Czech Republic.png- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
top = 51.3- Latitude at top edge of map, in decimal degrees
bottom = 48.3- Latitude at bottom edge of map, in decimal degrees
left = 11.8- Longitude at left edge of map, in decimal degrees
right = 19.2- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:
- Template:Location map#Relief parameter
- Template:Location map+/relief
- Template:Location map#AlternativeMap parameter
- Template:Location map+/AlternativeMap
Precision
Longitude: from West to East this map definition covers 7.4 degrees.
- At an image width of 200 pixels, that is 0.037 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0074 degrees per pixel.
Latitude: from North to South this map definition covers 3 degrees.
- At an image height of 200 pixels, that is 0.015 degrees per pixel.
- At an image height of 1000 pixels, that is 0.003 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Czech Republic
| width = 250
| lat_deg = 50.083
| lon_deg = 14.417
| label = Prague
}}
Location map many, using relief map (image1)
{{Location map many | Czech Republic
| relief = yes
| width = 250
| caption = Two locations in the Czech Republic
| lat1_deg = 50.083
| lon1_deg = 14.417
| label1 = Prague
| lat2_deg = 49.836
| lon2_deg = 18.293
| label2 = Ostrava
}}
Location map+, using AlternativeMap
{{Location map+ | Czech Republic
| AlternativeMap = Relief Map of Czech Republic.png
| width = 250
| caption = Two locations in the Czech Republic
| places =
{{Location map~ | Czech Republic
| lat_deg = 50.083
| lon_deg = 14.417
| label = Prague
}}
{{Location map~ | Czech Republic
| lat_deg = 49.836
| lon_deg = 18.293
| label = Ostrava
}}
}}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels
Creating new map definitions
return {
name = 'Czech Republic',
top = 51.3,
bottom = 48.3,
left = 11.8,
right = 19.2,
image = 'Czech Republic adm location map.svg',
image1 = 'Relief Map of Czech Republic.png'
}