Module:Israeli-Palestinian conflict detailed map/doc

This is the documentation page for Module:Israeli-Palestinian conflict detailed map

Template:Anchor

For quick reference, this module is transcluded on the following:

Icons available for use on map

Control :  11px Israel ; 11px Palestine (Ramallah administration); 11px Hamas ; 11px Hezbollah
Stable mixed control (same colours) : 11px 11px 11px   Rural presence :  12px  12px  12px  12px     12px  12px  12px  12px
Contested : 11px Israel/Palestine ; 11px Israel/Hamas ; 11px Israel/Hezbollah
Besieged_one_side : 11px 11px 11px 11px   11px 11px 11px 11px   11px 11px 11px 11px   11px 11px 11px 11px   11px 11px 11px 11px   11px 11px 11px 11px   11px 11px 11px 11px   11px 11px 11px 11px
Besieged : 2 nested circles: inner controls, outer sieges (or indicates strong enemy pressure) : 12px 12px 11px 11px   Military base : 13px 13px 13px 13px   Strategic hill : 13px 13px 13px 13px   Oil/gas : 13px 13px 13px
Airport/Air base (plane) : 13px 13px 13px 13px   Heliport/Helicopter base : 13px 13px 13px 13px
12px Major port or naval base ; 20px Border Post ; 16px Dam ; 12px Industrial complex
Small icon within a larger icon: the situation in individual neighbourhood/district

Labels

Only towns & border posts can have blue visible wikilink labels. Whether a town has a blue visible wikilink label or not will depend on its size, importance and available space around it for the label to appear without obstructing other towns. The wikilink labels have a minimum size of 65 (label_size=65).

Contested icon

Definition

The purpose of the contested icon (11px) is to show military or civil conflict and militant attacks or rocket attacks in a town.

Cities

Large cities do not always need to be marked contested in their entirety. Instead we can make image mini-maps for them or put small icons on them to represent neighborhoods that are contested or controlled by a specific party.

For example, we would not mark as contested a city where a party still controls 95% of the city. Instead we mark specific enemy positions on the outskirts of the city until fighting in the city becomes widespread. As nobody claims there is any fighting inside of the city, it should be marked as colored dot within a siege circle (see Figure 1). Then, advanced points in the city should be marked as small dots in the color of the enemy (or small contested icons). In this specific case, a "contested" icon was added to represent the "west side of the city" that is contested (see Figure 2). This is more informative to our viewers. Since the code puts icons on the map in the order of code lines (starting with first line of code and ending with last line of code), the small "contested" icon should come in the line after that of the (large) city icon. Otherwise, the small icon will be hidden by the large icon and will therefore be invisible.

After the fights become more widespread in the city (& enemy controls a larger part of the city), we can remove the "west side of the city" icon and turn the whole city contested (see Figure 3). After this, if we learn that the enemy has taken over the whole city except for a small pocket (in south east) that is still resisting, then we change the contested icon into the color of the enemy and put a small dot representing the small pocket that is still resisting (see Figure 4).

Siege and pressure from one side icons

Definition

The siege icon (12px) should be used for towns that are under siege or enemy pressure or militant attacks or rocket attacks. The “pressure from one side” icon (11px) should be used for towns that are under enemy pressure from one side.

How to place these icons

The easiest way to place these icons is to copy/paste the line code of the object you want to have a circle (or semi-circle) around it and then:

  1. Replace the mark = parameter with 12px or 11px
  2. Increase marksize = parameter by 4. So for example, if the town dot has a size of 10, then the circle (or semi-circle) should have a size of 14.

Always put line of code circle (or semi-circle) before line of code of town (or other object). This is because the code puts icons on the map in the order of code lines starting with first line of code and ending with last line of code. If you put the line of code that draws the circle (or semi-circle) icon after the line of code that draws the town icon then the computer puts the town icon first and then put the circle (or semi-circle) icon on top of it. The town icon still appears because the circle (or semi-circle) is drawn on a transparent background. However, even a transparent background does obstruct the name of the town icon from appearing. So, the name of the town will not appear when you hold cursor over it.

Example:

  • Correct: <syntaxhighlight lang="lua">{ lat = "33.972", long = "36.897", mark = "map-arcNE-black.svg", marksize = "12" },

{ lat = "33.972", long = "36.897", mark = "Abm-red+icon.png", marksize = "8", label = "Brigade 128", label_size = "0" },</syntaxhighlight>

  • Wrong: <syntaxhighlight lang="lua">{ lat = "33.972", long = "36.897", mark = "Abm-red+icon.png", marksize = "8", label = "Brigade 128", label_size = "0" },

{ lat = "33.972", long = "36.897", mark = "map-arcNE-black.svg", marksize = "8" },</syntaxhighlight>

"link=" parameter: linking towns to sources

Template:Location map+ Every element on the map should be verifiable. Information on towns (description of control & sources) can be found by clicking on the town dot on the map. Notice the caption of the map which says: "Hold cursor over location to display name; click to go to sources &/or status description (if available, the cursor will show as 25px; if not, it will show as 14px)."

Notice the “link=” parameter in the map code. This is supposed to link to the part in the Wikipedia article that contains the source and talks about the events in the town. So for example, if you click on the dot of the town "Inkhil" on the map, it will take you to the part of the Wikipedia article on the town "Inkhil" that has the description of war events (& sources): link = "Inkhil#civilwar" Here the first part before the # is the name of the article (Inkhil). the second part after the # is the name of the section (civilwar).

For this to work, there needs to be a section by this same name in the article or you need to put a wikilink anchor: {{anchor|section}} that will act as a section header (in this case {{anchor|civilwar}}).

The link to sources &/or status description should be done according to the following priorities in this order:

  1. The part of the town's article that talks about the war events in the town (see Example 1 below).
  2. The part of a "battle/offensive/etc..." article that talks about the latest status of the specific town (see Example 2 below).
  3. The article about the town which does not contain war events (still better than nothing).

A quick look at the map's code will tell you where each town dot is currently linking.

Example 1: How to keep town dots linked to the latest status source when the town has its own Wikipedia article.. The example concerns the town of Al-Taybah. First, notice how there is: link = "Al-Taybah#civilwar" parameter associated with the code line of town Al-Taybah. As indicated above, this links the Al-Taybah town dot with the war section in the town's Wikipedia article. This parameter does not change over time. However, the war section in the town's Wikipedia article needs to stay up-to-date in terms of the latest control status and latest associated source. For example, on 20/08/2017 the government took the town. To keep the link up-to-date, this latest event (along with the source) needs to be added to the war section in the town's Wikipedia article. To accomplish this, notice the following edit which added to the article the following text:

However, in 20/08/2017, the Army stormed the Taybah area from their positions at the Al-Kom axis, pushing their way through ISIL's front-lines. Unable to maintain their positions, ISIL was forced to retreat from Taybah, leaving the entire area for the Army to take control of after a short battle.<ref>[https://www.almasdarnews.com/article/breaking-syrian-army-liberates-important-area-besiege-isil-north-palmyra/ Syrian Army liberates important area to besiege ISIL north of Palmyra], Al-Masdar news, 20/08/2017.</ref>

This provides the latest status (along with the source) to viewers clicking on the town's dot in the map. Notice also how at the beginning of the war section in the town's Wikipedia article, there is the expression: {{anchor|civilwar}}. This mirrors the #civilwar part in the link parameter in the map's code and allows the click on the dot to take the viewer to the beginning of the war section in the town's Wikipedia article. In summary, when the status of a map object changes, the color of the icon has to be updated and the write-up (along with the source) has to be added as well.

Example 2: How to keep town dots linked to the latest status source when the town does not have its own Wikipedia article. The example concerns the town of "Kabajeb". Up to August 2017, the link parameter associated with the code line of the town was link= "Deir ez-Zor offensive (April–July 2014)#Kabajeb". As indicated above, this links the Kabajeb town dot with a war article that talks about the latest war events concerning the town (along with a source). This was done because the town Kabajeb does not have its own Wikipedia article. Therefore, the link is made to the article that have the latest status & source. In this case, it is the article Deir ez-Zor offensive (April–July 2014) which states in its code:

{{anchor|Kabajeb}}The ISIS reportedly took parts of the town,<ref>{{cite web|url=http://www.dailystar.com.lb/News/Middle-East/2014/Apr-10/252903-syria-qaeda-loses-ground-to-jihadist-rivals-on-iraq-border.ashx|title=Syria Qaeda loses ground to jihadist rivals on Iraq border|work=The Daily Star Newspaper - Lebanon|accessdate=25 October 2014}}</ref>

Notice how the paragraph starts with the expression {{anchor|Kabajeb}}. This guides the link to put the reader exactly at the beginning of the latest status & source. However, on 2017-09-04, the government took the town from ISIS. So the above link & source is no longer up-to-date. To stay up-to-date, you need to do 2 steps:

Step 1: Write about the new status in some "battle/offensive/etc..." article that relates to the town. Alternatively, you can find an up-to-date text that someone else wrote and proceed to the next step. In our case, you find that someone wrote this updated status in the article Central Syria campaign (July 2017–present) which states in its code:

5th Corps alongside 18th Reserve Division captured the town of Kabajib during midday, while later in the day together with Tiger Forces captured al-Shulah.<ref>{{Cite news|url=https://www.almasdarnews.com/article/breaking-syrian-army-liberates-strategic-town-en-route-deir-ezzor-city/|title=Breaking: Syrian Army liberates strategic town en route to Deir Ezzor City|date=2017-09-04|work=AMN - Al-Masdar News {{!}} المصدر نيوز|access-date=2017-09-04|language=en-US}}</ref>

This is exactly what we need. Therefore, we proceed to the next step.

Step 2: In the map code, we need to update the link parameter to point to the new status in the new article. This edit does this. As you can see, the link was changed from link="Deir ez-Zor offensive (April–July 2014)#Kabajeb" to link="Central Syria campaign (July 2017–present)#Kabajeb". However, for this to work, we need to also put the expression {{anchor|Kabajeb}} at the beginning of the part in the new article that talks about the new status. This is done in this edit.

Example 3: For another illustration on how the link= parameter and "anchor" template work, see Talk:Cities and towns during the Syrian Civil War/Archive 65#Link of Suran, Hama.

How to preview map before saving edit

Before saving your changes (by clicking "Publish changes"), you should preview your edits (changes). This allows you to view the map to make sure it is what you want to do before saving and making the change appear on Wikipedia. To do this, type in the box under "Preview page with this module" the name of the template: "Template:Israeli-Palestinian conflict detailed map". Then hit "Show preview".

How war map module work with other parts of Wikipedia

<templatestyles src="Module:Location map/styles.css"></templatestyles>

Israeli-Palestinian conflict detailed map/doc is located in Israel
Taba border crossing
Nitzana border crossing
Netafim border crossing
Meged oil field
Heletz oil field
Ben Gurion Airport
Gaza Airstrip
Kafr Qaddum
Yasser Arafat International Airport
Ovda Airport
Ramon Airport
Eilat Airport
Haifa Airport
Atarot Airport
Wadi Araba Crossing
Karni crossing
Kerem Shalom border crossing
Jordan River crossing
Allenby Bridge
Erez Crossing
Hold cursor over location to display name; click to go to sources &/or status description (if available, the cursor will show as 25px; if not, it will show as 14px).

Control

Stable mixed control

Contested

12px Inner controls, outer sieges (or strong enemy pressure); 11px Enemy pressure from one side; Small icon within a larger icon: The situation in individual neighbourhood/district
13px Airport/Air base; 13px Heliport/Helicopter base; 13px Military base; 13px Strategic hill; 12px Oil/gas; 12px Industrial complex; 20px Border Post; 12px Major port or naval base;

16px Dam; 13px Rural presence