Module:Convert/data
MyWikiBiz, Author Your Legacy — Friday November 22, 2024
Jump to navigationJump to searchTemplate:Module rating This page defines the conversion data used by Module:Convert. All documentation (from Module:Convert/doc) is at that page.
Do not manually add units to this page. First add the unit definitions in Module:Convert/documentation/conversion data. And then update this page by copying the results from Module:Convert/makeunits (those results appear at Module talk:Convert/makeunits).
Any changes should first be tested at Module:Convert/data/sandbox—see Module:Convert/sandbox/testcases.
New units can be manually added at Module:Convert/extra as a temporary measure before being incorporated into this main table.
-- Conversion data used by [[Module:Convert]] which uses mw.loadData() for
-- read-only access to this module so that it is loaded only once per page.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
--
-- These data tables follow:
-- all_units all properties for a unit, including default output
-- default_exceptions exceptions for default output ('kg' and 'g' have different defaults)
-- link_exceptions exceptions for links ('kg' and 'g' have different links)
--
-- These tables are generated by a script which reads the wikitext of a page that
-- documents the required properties of each unit; see [[:en:Module:Convert/doc]].
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local all_units = {
["Gy"] = {
_name1 = "gray",
_symbol = "Gy",
utype = "absorbed radiation dose",
scale = 1,
prefixes = 1,
default = "rad",
link = "Gray (unit)",
},
["rad"] = {
_name1 = "rad",
_symbol = "rad",
utype = "absorbed radiation dose",
scale = 0.01,
prefixes = 1,
default = "Gy",
link = "Rad (unit)",
},
["cm/s2"] = {
name1 = "centimetre per second squared",
name1_us = "centimeter per second squared",
name2 = "centimetres per second squared",
name2_us = "centimeters per second squared",
symbol = "cm/s<sup>2</sup>",
utype = "acceleration",
scale = 0.01,
default = "ft/s2",
link = "Gal (unit)",
},
["ft/s2"] = {
name1 = "foot per second squared",
name2 = "feet per second squared",
symbol = "ft/s<sup>2</sup>",
utype = "acceleration",
scale = 0.3048,
default = "m/s2",
},
["g0"] = {
name1 = "standard gravity",
name2 = "standard gravities",
symbol = "''g''<sub>0</sub>",
utype = "acceleration",
scale = 9.80665,
default = "m/s2",
},
["g-force"] = {
name2 = "''g''",
symbol = "''g''",
utype = "acceleration",
scale = 9.80665,
default = "m/s2",
link = "g-force",
},
["km/hs"] = {
name1 = "kilometre per hour per second",
name1_us = "kilometer per hour per second",
name2 = "kilometres per hour per second",
name2_us = "kilometers per hour per second",
symbol = "km/(h⋅s)",
utype = "acceleration",
scale = 0.27777777777777779,
default = "mph/s",
link = "Acceleration",
},
["km/s2"] = {
name1 = "kilometre per second squared",
name1_us = "kilometer per second squared",
name2 = "kilometres per second squared",
name2_us = "kilometers per second squared",
symbol = "km/s<sup>2</sup>",
utype = "acceleration",
scale = 1000,
default = "mph/s",
link = "Acceleration",
},
["m/s2"] = {
name1 = "metre per second squared",
name1_us = "meter per second squared",
name2 = "metres per second squared",
name2_us = "meters per second squared",
symbol = "m/s<sup>2</sup>",
utype = "acceleration",
scale = 1,
default = "ft/s2",
},
["mph/s"] = {
name1 = "mile per hour per second",
name2 = "miles per hour per second",
symbol = "mph/s",
utype = "acceleration",
scale = 0.44704,
default = "km/hs",
link = "Acceleration",
},
["km/h/s"] = {
target = "km/hs",
},
["standard gravity"] = {
target = "g0",
},
["1000sqft"] = {
name1 = "thousand square feet",
name2 = "thousand square feet",
symbol = "1000 sq ft",
utype = "area",
scale = 92.90304,
default = "m2",
link = "Square foot",
},
["a"] = {
_name1 = "are",
_symbol = "a",
utype = "area",
scale = 100,
prefixes = 1,
default = "sqft",
link = "Hectare#Are",
},
["acre"] = {
symbol = "acre",
usename = 1,
utype = "area",
scale = 4046.8564224,
default = "ha",
subdivs = { ["rood"] = { 4, default = "ha" }, ["sqperch"] = { 160, default = "ha" } },
},
["acre-sing"] = {
target = "acre",
},
["arpent"] = {
symbol = "arpent",
usename = 1,
utype = "area",
scale = 3418.89,
default = "ha",
},
["cda"] = {
name1 = "cuerda",
symbol = "cda",
utype = "area",
scale = 3930.395625,
default = "ha acre",
},
["daa"] = {
name1 = "decare",
symbol = "daa",
utype = "area",
scale = 1000,
default = "km2 sqmi",
},
["dunam"] = {
symbol = "dunam",
usename = 1,
utype = "area",
scale = 1000,
default = "km2 sqmi",
},
["dunum"] = {
symbol = "dunum",
usename = 1,
utype = "area",
scale = 1000,
default = "km2 sqmi",
link = "Dunam",
},
["ha"] = {
name1 = "hectare",
symbol = "ha",
utype = "area",
scale = 10000,
default = "acre",
},
["hectare"] = {
name1 = "hectare",
symbol = "ha",
usename = 1,
utype = "area",
scale = 10000,
default = "acre",
},
["Irish acre"] = {
name1 = "Irish acre",
symbol = "Irish acres",
utype = "area",
scale = 6555.2385024,
default = "ha",
link = "Acre (Irish)",
},
["m2"] = {
_name1 = "square metre",
_name1_us= "square meter",
_symbol = "m<sup>2</sup>",
prefix_position= 8,
utype = "area",
scale = 1,
prefixes = 2,
default = "sqft",
link = "Square metre",
},
["pondemaat"] = {
name1 = "pondemaat",
name2 = "pondemaat",
symbol = "pond",
utype = "area",
scale = 3674.363358816,
default = "m2",
link = ":nl:pondemaat",
},
["pyeong"] = {
name2 = "pyeong",
symbol = "pyeong",
usename = 1,
utype = "area",
scale = 3.3057851239669422,
default = "m2",
},
["rai"] = {
name2 = "rai",
symbol = "rai",
utype = "area",
scale = 1600,
default = "m2",
link = "Rai (unit)",
},
["rood"] = {
symbol = "rood",
usename = 1,
utype = "area",
scale = 1011.7141056,
default = "sqft m2",
subdivs = { ["sqperch"] = { 40, default = "m2" } },
link = "Rood (unit)",
},
["sqfoot"] = {
name1 = "square foot",
name2 = "square foot",
symbol = "sq ft",
utype = "area",
scale = 0.09290304,
default = "m2",
},
["sqft"] = {
name1 = "square foot",
name2 = "square feet",
symbol = "sq ft",
utype = "area",
scale = 0.09290304,
default = "m2",
},
["sqin"] = {
name1 = "square inch",
name2 = "square inches",
symbol = "sq in",
utype = "area",
scale = 0.00064516,
default = "cm2",
},
["sqmi"] = {
name1 = "square mile",
symbol = "sq mi",
utype = "area",
scale = 2589988.110336,
default = "km2",
},
["sqnmi"] = {
name1 = "square nautical mile",
symbol = "sq nmi",
utype = "area",
scale = 3429904,
default = "km2 sqmi",
link = "Nautical mile",
},
["sqperch"] = {
name2 = "perches",
symbol = "perch",
usename = 1,
utype = "area",
scale = 25.29285264,
default = "m2",
link = "Rod (unit)#Area and volume",
},
["sqverst"] = {
symbol = "square verst",
usename = 1,
utype = "area",
scale = 1138062.24,
default = "km2 sqmi",
link = "Verst",
},
["sqyd"] = {
name1 = "square yard",
symbol = "sq yd",
utype = "area",
scale = 0.83612736,
default = "m2",
},
["tsubo"] = {
name2 = "tsubo",
symbol = "tsubo",
usename = 1,
utype = "area",
scale = 3.3057851239669422,
default = "m2",
link = "Japanese units of measurement#Area",
},
["acres"] = {
target = "acre",
},
["are"] = {
target = "a",
},
["decare"] = {
target = "daa",
},
["foot2"] = {
target = "sqfoot",
},
["ft2"] = {
target = "sqft",
},
["in2"] = {
target = "sqin",
symbol = "in<sup>2</sup>",
},
["km²"] = {
target = "km2",
},
["mi2"] = {
target = "sqmi",
},
["million acre"] = {
target = "e6acre",
},
["million acres"] = {
target = "e6acre",
},
["million hectares"] = {
target = "e6ha",
},
["m²"] = {
target = "m2",
},
["nmi2"] = {
target = "sqnmi",
},
["pond"] = {
target = "pondemaat",
},
["sq arp"] = {
target = "arpent",
},
["sqkm"] = {
target = "km2",
},
["sqm"] = {
target = "m2",
},
["square verst"] = {
target = "sqverst",
},
["verst2"] = {
target = "sqverst",
},
["yd2"] = {
target = "sqyd",
},
["m2/ha"] = {
name1 = "square metre per hectare",
name1_us = "square meter per hectare",
name2 = "square metres per hectare",
name2_us = "square meters per hectare",
symbol = "m<sup>2</sup>/ha",
utype = "area per unit area",
scale = 0.0001,
default = "sqft/acre",
link = "Basal area",
},
["sqft/acre"] = {
name1 = "square foot per acre",
name2 = "square feet per acre",
symbol = "sq ft/acre",
utype = "area per unit area",
scale = 2.295684113865932e-5,
default = "m2/ha",
link = "Basal area",
},
["cent"] = {
name1 = "cent",
symbol = "¢",
utype = "cent",
scale = 1,
default = "cent",
link = "Cent (currency)",
},
["¢"] = {
target = "cent",
},
["A.h"] = {
name1 = "ampere hour",
symbol = "A⋅h",
utype = "charge",
scale = 3600,
default = "coulomb",
},
["coulomb"] = {
_name1 = "coulomb",
_symbol = "C",
utype = "charge",
scale = 1,
prefixes = 1,
default = "e",
link = "Coulomb",
},
["e"] = {
name1 = "elementary charge",
symbol = "''e''",
utype = "charge",
scale = 1.602176487e-19,
default = "coulomb",
},
["g-mol"] = {
name1 = "gram-mole",
symbol = "g‑mol",
utype = "chemical amount",
scale = 1,
default = "lbmol",
link = "Mole (unit)",
},
["gmol"] = {
name1 = "gram-mole",
symbol = "gmol",
utype = "chemical amount",
scale = 1,
default = "lbmol",
link = "Mole (unit)",
},
["kmol"] = {
name1 = "kilomole",
symbol = "kmol",
utype = "chemical amount",
scale = 1000,
default = "lbmol",
link = "Mole (unit)",
},
["lb-mol"] = {
name1 = "pound-mole",
symbol = "lb‑mol",
utype = "chemical amount",
scale = 453.59237,
default = "mol",
},
["lbmol"] = {
name1 = "pound-mole",
symbol = "lbmol",
utype = "chemical amount",
scale = 453.59237,
default = "mol",
},
["mol"] = {
name1 = "mole",
symbol = "mol",
utype = "chemical amount",
scale = 1,
default = "lbmol",
link = "Mole (unit)",
},
["kgCO2/L"] = {
name1 = "kilogram per litre",
name1_us = "kilogram per liter",
name2 = "kilograms per litre",
name2_us = "kilograms per liter",
symbol = "kg(CO<sub>2</sub>)/L",
utype = "co2 per unit volume",
scale = 1000,
default = "lbCO2/USgal",
link = "Exhaust gas",
},
["lbCO2/USgal"] = {
name1 = "pound per US gallon",
name2 = "pounds per US gallon",
symbol = "lbCO2/US gal",
utype = "co2 per unit volume",
scale = 119.82642731689663,
default = "kgCO2/L",
link = "Exhaust gas",
},
["oz/lb"] = {
per = { "oz", "lb" },
utype = "concentration",
default = "mg/kg",
},
["mg/kg"] = {
per = { "mg", "kg" },
utype = "concentration",
default = "oz/lb",
},
["g/dm3"] = {
name1 = "gram per cubic decimetre",
name1_us = "gram per cubic decimeter",
name2 = "grams per cubic decimetre",
name2_us = "grams per cubic decimeter",
symbol = "g/dm<sup>3</sup>",
utype = "density",
scale = 1,
default = "kg/m3",
link = "Density",
},
["g/L"] = {
name1 = "gram per litre",
name1_us = "gram per liter",
name2 = "grams per litre",
name2_us = "grams per liter",
symbol = "g/L",
utype = "density",
scale = 1,
default = "lb/cuin",
link = "Density",
},
["g/mL"] = {
name1 = "gram per millilitre",
name1_us = "gram per milliliter",
name2 = "grams per millilitre",
name2_us = "grams per milliliter",
symbol = "g/mL",
utype = "density",
scale = 1000,
default = "lb/cuin",
link = "Density",
},
["g/ml"] = {
name1 = "gram per millilitre",
name1_us = "gram per milliliter",
name2 = "grams per millilitre",
name2_us = "grams per milliliter",
symbol = "g/ml",
utype = "density",
scale = 1000,
default = "lb/cuin",
link = "Density",
},
["kg/dm3"] = {
name1 = "kilogram per cubic decimetre",
name1_us = "kilogram per cubic decimeter",
name2 = "kilograms per cubic decimetre",
name2_us = "kilograms per cubic decimeter",
symbol = "kg/dm<sup>3</sup>",
utype = "density",
scale = 1000,
default = "lb/cuft",
link = "Density",
},
["kg/L"] = {
name1 = "kilogram per litre",
name1_us = "kilogram per liter",
name2 = "kilograms per litre",
name2_us = "kilograms per liter",
symbol = "kg/L",
utype = "density",
scale = 1000,
default = "lb/USgal",
link = "Density",
},
["kg/l"] = {
name1 = "kilogram per litre",
name1_us = "kilogram per liter",
name2 = "kilograms per litre",
name2_us = "kilograms per liter",
symbol = "kg/l",
utype = "density",
scale = 1000,
default = "lb/USgal",
link = "Density",
},
["kg/m3"] = {
name1 = "kilogram per cubic metre",
name1_us = "kilogram per cubic meter",
name2 = "kilograms per cubic metre",
name2_us = "kilograms per cubic meter",
symbol = "kg/m<sup>3</sup>",
utype = "density",
scale = 1,
default = "lb/cuyd",
link = "Density",
},
["lb/cuft"] = {
name1 = "pound per cubic foot",
name2 = "pounds per cubic foot",
symbol = "lb/cu ft",
utype = "density",
scale = 16.018463373960142,
default = "g/cm3",
link = "Density",
},
["lb/cuin"] = {
name1 = "pound per cubic inch",
name2 = "pounds per cubic inch",
symbol = "lb/cu in",
utype = "density",
scale = 27679.904710203122,
default = "g/cm3",
link = "Density",
},
["lb/cuyd"] = {
name1 = "pound per cubic yard",
name2 = "pounds per cubic yard",
symbol = "lb/cu yd",
utype = "density",
scale = 0.5932764212577829,
default = "kg/m3",
link = "Density",
},
["lb/impgal"] = {
name1 = "pound per imperial gallon",
name2 = "pounds per imperial gallon",
symbol = "lb/imp gal",
utype = "density",
scale = 99.776372663101697,
default = "kg/L",
link = "Density",
},
["lb/in3"] = {
name1 = "pound per cubic inch",
name2 = "pounds per cubic inch",
symbol = "lb/cu in",
utype = "density",
scale = 27679.904710203122,
default = "g/cm3",
link = "Density",
},
["lb/U.S.gal"] = {
name1 = "pound per U.S. gallon",
name2 = "pounds per U.S. gallon",
symbol = "lb/U.S. gal",
utype = "density",
scale = 119.82642731689663,
default = "kg/L",
link = "Density",
},
["lb/USbu"] = {
name1 = "pound per US bushel",
name2 = "pounds per US bushel",
symbol = "lb/US bu",
utype = "density",
scale = 12.871859780974471,
default = "kg/m3",
link = "Bushel",
},
["lb/USgal"] = {
name1 = "pound per US gallon",
name2 = "pounds per US gallon",
symbol = "lb/US gal",
utype = "density",
scale = 119.82642731689663,
default = "kg/L",
link = "Density",
},
["lbm/cuin"] = {
name1 = "pound mass per cubic inch",
name2 = "pounds mass per cubic inch",
symbol = "lbm/cu in",
utype = "density",
scale = 27679.904710203122,
default = "g/cm3",
link = "Density",
},
["mg/L"] = {
name1 = "milligram per litre",
name1_us = "milligram per liter",
name2 = "milligrams per litre",
name2_us = "milligrams per liter",
symbol = "mg/L",
utype = "density",
scale = 0.001,
default = "lb/cuin",
link = "Density",
},
["oz/cuin"] = {
name1 = "ounce per cubic inch",
name2 = "ounces per cubic inch",
symbol = "oz/cu in",
utype = "density",
scale = 1729.9940443876951,
default = "g/cm3",
link = "Density",
},
["g/cm3"] = {
per = { "g", "cm3" },
utype = "density",
default = "lb/cuin",
},
["g/m3"] = {
per = { "g", "m3" },
utype = "density",
default = "lb/cuyd",
link = "Density",
},
["Mg/m3"] = {
per = { "Mg", "m3" },
utype = "density",
default = "lb/cuft",
},
["mg/l"] = {
per = { "mg", "l" },
utype = "density",
default = "oz/cuin",
},
["μg/dL"] = {
per = { "μg", "dL" },
utype = "density",
default = "lb/cuin",
},
["μg/l"] = {
per = { "μg", "l" },
utype = "density",
default = "oz/cuin",
},
["lb/ft3"] = {
target = "lb/cuft",
},
["lb/yd3"] = {
target = "lb/cuyd",
},
["lbm/in3"] = {
target = "lbm/cuin",
},
["mcg/dL"] = {
target = "μg/dL",
},
["oz/in3"] = {
target = "oz/cuin",
},
["ug/dL"] = {
target = "μg/dL",
},
["ug/l"] = {
target = "μg/l",
},
["B.O.T.U."] = {
name1 = "Board of Trade Unit",
symbol = "B.O.T.U.",
utype = "energy",
scale = 3600000,
default = "MJ",
link = "Watt-hour",
},
["bboe"] = {
name1 = "barrel of oil equivalent",
name2 = "barrels of oil equivalent",
symbol = "bboe",
utype = "energy",
scale = 6117863200,
default = "GJ",
},
["BOE"] = {
name1 = "barrel of oil equivalent",
name2 = "barrels of oil equivalent",
symbol = "BOE",
utype = "energy",
scale = 6117863200,
default = "GJ",
},
["BTU"] = {
name1 = "British thermal unit",
symbol = "BTU",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
},
["Btu"] = {
name1 = "British thermal unit",
symbol = "Btu",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
},
["BTU-39F"] = {
name1 = "British thermal unit (39°F)",
name2 = "British thermal units (39°F)",
symbol = "BTU<sub>39°F</sub>",
utype = "energy",
scale = 1059.67,
default = "kJ",
link = "British thermal unit",
},
["Btu-39F"] = {
name1 = "British thermal unit (39°F)",
name2 = "British thermal units (39°F)",
symbol = "Btu<sub>39°F</sub>",
utype = "energy",
scale = 1059.67,
default = "kJ",
link = "British thermal unit",
},
["BTU-59F"] = {
name1 = "British thermal unit (59°F)",
name2 = "British thermal units (59°F)",
symbol = "BTU<sub>59°F</sub>",
utype = "energy",
scale = 1054.804,
default = "kJ",
link = "British thermal unit",
},
["Btu-59F"] = {
name1 = "British thermal unit (59°F)",
name2 = "British thermal units (59°F)",
symbol = "Btu<sub>59°F</sub>",
utype = "energy",
scale = 1054.804,
default = "kJ",
link = "British thermal unit",
},
["BTU-60F"] = {
name1 = "British thermal unit (60°F)",
name2 = "British thermal units (60°F)",
symbol = "BTU<sub>60°F</sub>",
utype = "energy",
scale = 1054.68,
default = "kJ",
link = "British thermal unit",
},
["Btu-60F"] = {
name1 = "British thermal unit (60°F)",
name2 = "British thermal units (60°F)",
symbol = "Btu<sub>60°F</sub>",
utype = "energy",
scale = 1054.68,
default = "kJ",
link = "British thermal unit",
},
["BTU-63F"] = {
name1 = "British thermal unit (63°F)",
name2 = "British thermal units (63°F)",
symbol = "BTU<sub>63°F</sub>",
utype = "energy",
scale = 1054.6,
default = "kJ",
link = "British thermal unit",
},
["Btu-63F"] = {
name1 = "British thermal unit (63°F)",
name2 = "British thermal units (63°F)",
symbol = "Btu<sub>63°F</sub>",
utype = "energy",
scale = 1054.6,
default = "kJ",
link = "British thermal unit",
},
["BTU-ISO"] = {
name1 = "British thermal unit (ISO)",
name2 = "British thermal units (ISO)",
symbol = "BTU<sub>ISO</sub>",
utype = "energy",
scale = 1055.056,
default = "kJ",
link = "British thermal unit",
},
["Btu-ISO"] = {
target = "BTU-ISO",
},
["BTU-IT"] = {
name1 = "British thermal unit (IT)",
name2 = "British thermal units (IT)",
symbol = "BTU<sub>IT</sub>",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
link = "British thermal unit",
},
["Btu-IT"] = {
name1 = "British thermal unit (IT)",
name2 = "British thermal units (IT)",
symbol = "Btu<sub>IT</sub>",
utype = "energy",
scale = 1055.05585262,
default = "kJ",
link = "British thermal unit",
},
["BTU-mean"] = {
name1 = "British thermal unit (mean)",
name2 = "British thermal units (mean)",
symbol = "BTU<sub>mean</sub>",
utype = "energy",
scale = 1055.87,
default = "kJ",
link = "British thermal unit",
},
["Btu-mean"] = {
name1 = "British thermal unit (mean)",
name2 = "British thermal units (mean)",
symbol = "Btu<sub>mean</sub>",
utype = "energy",
scale = 1055.87,
default = "kJ",
link = "British thermal unit",
},
["BTU-th"] = {
name1 = "British thermal unit (thermochemical)",
name2 = "British thermal units (thermochemical)",
symbol = "BTU<sub>th</sub>",
utype = "energy",
scale = 1054.35026444,
default = "kJ",
link = "British thermal unit",
},
["Btu-th"] = {
name1 = "British thermal unit (thermochemical)",
name2 = "British thermal units (thermochemical)",
symbol = "Btu<sub>th</sub>",
utype = "energy",
scale = 1054.35026444,
default = "kJ",
link = "British thermal unit",
},
["Cal"] = {
name1 = "calorie",
symbol = "Cal",
utype = "energy",
scale = 4184,
default = "kJ",
},
["cal"] = {
name1 = "calorie",
symbol = "cal",
utype = "energy",
scale = 4.184,
default = "J",
},
["Cal-15"] = {
name1 = "Calorie (15°C)",
name2 = "Calories (15°C)",
symbol = "Cal<sub>15</sub>",
utype = "energy",
scale = 4185.8,
default = "kJ",
link = "Calorie",
},
["cal-15"] = {
name1 = "calorie (15°C)",
name2 = "calories (15°C)",
symbol = "cal<sub>15</sub>",
utype = "energy",
scale = 4.1858,
default = "J",
link = "Calorie",
},
["Cal-IT"] = {
name1 = "Calorie (International Steam Table)",
name2 = "Calories (International Steam Table)",
symbol = "Cal<sub>IT</sub>",
utype = "energy",
scale = 4186.8,
default = "kJ",
link = "Calorie",
},
["cal-IT"] = {
name1 = "calorie (International Steam Table)",
name2 = "calories (International Steam Table)",
symbol = "cal<sub>IT</sub>",
utype = "energy",
scale = 4.1868,
default = "J",
link = "Calorie",
},
["Cal-th"] = {
name1 = "Calorie (thermochemical)",
name2 = "Calories (thermochemical)",
symbol = "Cal<sub>th</sub>",
utype = "energy",
scale = 4184,
default = "kJ",
link = "Calorie",
},
["cal-th"] = {
name1 = "calorie (thermochemical)",
name2 = "calories (thermochemical)",
symbol = "cal<sub>th</sub>",
utype = "energy",
scale = 4.184,
default = "J",
link = "Calorie",
},
["CHU-IT"] = {
name1 = "Celsius heat unit (International Table)",
name2 = "Celsius heat units (International Table)",
symbol = "CHU<sub>IT</sub>",
utype = "energy",
scale = 1899.100534716,
default = "kJ",
link = "Conversion of units#Energy",
},
["cufootnaturalgas"] = {
name1 = "cubic foot of natural gas",
name2 = "cubic foot of natural gas",
symbol = "cuftnaturalgas",
usename = 1,
utype = "energy",
scale = 1055055.85262,
default = "MJ",
link = "Conversion of units#Energy",
},
["cuftnaturalgas"] = {
name1 = "cubic foot of natural gas",
name2 = "cubic feet of natural gas",
symbol = "cuftnaturalgas",
usename = 1,
utype = "energy",
scale = 1055055.85262,
default = "MJ",
link = "Conversion of units#Energy",
},
["Eh"] = {
name1 = "Hartree",
symbol = "''E''<sub>h</sub>",
utype = "energy",
scale = 4.35974417e-18,
default = "eV",
},
["erg"] = {
symbol = "erg",
utype = "energy",
scale = 0.0000001,
default = "μJ",
},
["eV"] = {
name1 = "electronvolt",
symbol = "eV",
utype = "energy",
scale = 1.602176487e-19,
default = "aJ",
},
["feV"] = {
name1 = "femtoelectronvolt",
symbol = "feV",
utype = "energy",
scale = 1.602176487e-34,
default = "yJ",
link = "Electronvolt",
},
["foe"] = {
symbol = "foe",
utype = "energy",
scale = 1e44,
default = "YJ",
link = "Foe (unit)",
},
["ftlb"] = {
name1 = "foot-pound",
symbol = "ft⋅lb",
utype = "energy",
alttype = "torque",
scale = 1.3558179483314004,
default = "J",
link = "Foot-pound (energy)",
},
["ftlb-f"] = {
name1 = "foot-pound force",
name2 = "foot-pounds force",
symbol = "ft⋅lb<sub>f</sub>",
utype = "energy",
alttype = "torque",
scale = 1.3558179483314004,
default = "J",
link = "Foot-pound (energy)",
},
["ftlbf"] = {
name1 = "foot-pound force",
name2 = "foot-pounds force",
symbol = "ft⋅lbf",
utype = "energy",
alttype = "torque",
scale = 1.3558179483314004,
default = "J",
link = "Foot-pound (energy)",
},
["ftpdl"] = {
name1 = "foot-poundal",
symbol = "ft⋅pdl",
utype = "energy",
scale = 0.0421401100938048,
default = "J",
},
["GeV"] = {
name1 = "gigaelectronvolt",
symbol = "GeV",
utype = "energy",
scale = 1.602176487e-10,
default = "nJ",
link = "Electronvolt",
},
["gTNT"] = {
name2 = "grams of TNT",
symbol = "gram of TNT",
usename = 1,
utype = "energy",
scale = 4184,
default = "kJ",
link = "TNT equivalent",
},
["Gtoe"] = {
name1 = "gigatonne of oil equivalent",
name2 = "gigatonnes of oil equivalent",
symbol = "Gtoe",
utype = "energy",
scale = 4.1868e19,
default = "EJ",
link = "Tonne of oil equivalent",
},
["GtonTNT"] = {
name2 = "gigatons of TNT",
symbol = "gigaton of TNT",
usename = 1,
utype = "energy",
scale = 4.184e18,
default = "EJ",
link = "TNT equivalent",
},
["GtTNT"] = {
name2 = "gigatonnes of TNT",
symbol = "gigatonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e18,
default = "EJ",
link = "TNT equivalent",
},
["GW.h"] = {
name1 = "gigawatt-hour",
symbol = "GW⋅h",
utype = "energy",
scale = 3.6e12,
default = "TJ",
link = "Watt-hour",
},
["GWh"] = {
name1 = "gigawatt-hour",
symbol = "GWh",
utype = "energy",
scale = 3.6e12,
default = "TJ",
link = "Watt-hour",
},
["hph"] = {
name1 = "horsepower-hour",
symbol = "hp⋅h",
utype = "energy",
scale = 2684519.537696172792,
default = "kWh",
link = "Horsepower",
},
["inlb"] = {
name1 = "inch-pound",
symbol = "in⋅lb",
utype = "energy",
alttype = "torque",
scale = 0.1129848290276167,
default = "mJ",
link = "Foot-pound (energy)",
},
["inlb-f"] = {
name1 = "inch-pound force",
name2 = "inch-pounds force",
symbol = "in⋅lb<sub>f</sub>",
utype = "energy",
alttype = "torque",
scale = 0.1129848290276167,
default = "mJ",
link = "Foot-pound (energy)",
},
["inlbf"] = {
name1 = "inch-pound force",
name2 = "inch-pounds force",
symbol = "in⋅lbf",
utype = "energy",
alttype = "torque",
scale = 0.1129848290276167,
default = "mJ",
link = "Foot-pound (energy)",
},
["inoz-f"] = {
name1 = "inch-ounce force",
name2 = "inch-ounces force",
symbol = "in⋅oz<sub>f</sub>",
utype = "energy",
alttype = "torque",
scale = 0.00706155181422604375,
default = "mJ",
link = "Foot-pound (energy)",
},
["inozf"] = {
name1 = "inch-ounce force",
name2 = "inch-ounces force",
symbol = "in⋅ozf",
utype = "energy",
alttype = "torque",
scale = 0.00706155181422604375,
default = "mJ",
link = "Foot-pound (energy)",
},
["J"] = {
_name1 = "joule",
_symbol = "J",
utype = "energy",
scale = 1,
prefixes = 1,
default = "cal",
link = "Joule",
},
["kBOE"] = {
name1 = "kilo barrel of oil equivalent",
name2 = "kilo barrels of oil equivalent",
symbol = "kBOE",
utype = "energy",
scale = 6.1178632e12,
default = "TJ",
link = "Barrel of oil equivalent",
},
["kcal"] = {
name1 = "kilocalorie",
symbol = "kcal",
utype = "energy",
scale = 4184,
default = "kJ",
link = "Calorie",
},
["kcal-15"] = {
name1 = "kilocalorie (15°C)",
name2 = "kilocalories (15°C)",
symbol = "kcal<sub>15</sub>",
utype = "energy",
scale = 4185.8,
default = "kJ",
link = "Calorie",
},
["kcal-IT"] = {
name1 = "kilocalorie (International Steam Table)",
name2 = "kilocalories (International Steam Table)",
symbol = "kcal<sub>IT</sub>",
utype = "energy",
scale = 4186.8,
default = "kJ",
link = "Calorie",
},
["kcal-th"] = {
name1 = "kilocalorie (thermochemical)",
name2 = "kilocalories (thermochemical)",
symbol = "kcal<sub>th</sub>",
utype = "energy",
scale = 4184,
default = "kJ",
link = "Calorie",
},
["kerg"] = {
name1 = "kiloerg",
symbol = "kerg",
utype = "energy",
scale = 0.0001,
default = "mJ",
link = "Erg",
},
["keV"] = {
name1 = "kiloelectronvolt",
symbol = "keV",
utype = "energy",
scale = 1.602176487e-16,
default = "fJ",
link = "Electronvolt",
},
["kgTNT"] = {
name2 = "kilograms of TNT",
symbol = "kilogram of TNT",
usename = 1,
utype = "energy",
scale = 4184000,
default = "MJ",
link = "TNT equivalent",
},
["kt(TNT)"] = {
name1 = "kilotonne",
name1_us = "kiloton",
symbol = "kt",
utype = "energy",
scale = 4.184e12,
default = "TJ",
link = "TNT equivalent",
},
["ktoe"] = {
name1 = "kilotonne of oil equivalent",
name2 = "kilotonnes of oil equivalent",
symbol = "ktoe",
utype = "energy",
scale = 4.1868e13,
default = "TJ",
link = "Tonne of oil equivalent",
},
["ktonTNT"] = {
name1 = "kiloton of TNT",
name2 = "kilotons of TNT",
symbol = "kt",
utype = "energy",
scale = 4.184e12,
default = "TJ",
link = "TNT equivalent",
},
["ktTNT"] = {
name2 = "kilotonnes of TNT",
symbol = "kilotonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e12,
default = "TJ",
link = "TNT equivalent",
},
["kW.h"] = {
name1 = "kilowatt-hour",
symbol = "kW⋅h",
utype = "energy",
scale = 3600000,
default = "MJ",
link = "Watt-hour",
},
["kWh"] = {
name1 = "kilowatt-hour",
symbol = "kWh",
utype = "energy",
scale = 3600000,
default = "MJ",
link = "Watt-hour",
},
["Mcal"] = {
name1 = "megacalorie",
symbol = "Mcal",
utype = "energy",
scale = 4184000,
default = "MJ",
link = "Calorie",
},
["mcal"] = {
name1 = "millicalorie",
symbol = "mcal",
utype = "energy",
scale = 0.004184,
default = "mJ",
link = "Calorie",
},
["Mcal-15"] = {
name1 = "megacalorie (15°C)",
name2 = "megacalories (15°C)",
symbol = "Mcal<sub>15</sub>",
utype = "energy",
scale = 4185800,
default = "MJ",
link = "Calorie",
},
["mcal-15"] = {
name1 = "millicalorie (15°C)",
name2 = "millicalories (15°C)",
symbol = "mcal<sub>15</sub>",
utype = "energy",
scale = 0.0041858,
default = "mJ",
link = "Calorie",
},
["Mcal-IT"] = {
name1 = "megacalorie (International Steam Table)",
name2 = "megacalories (International Steam Table)",
symbol = "Mcal<sub>IT</sub>",
utype = "energy",
scale = 4186800,
default = "MJ",
link = "Calorie",
},
["mcal-IT"] = {
name1 = "millicalorie (International Steam Table)",
name2 = "millicalories (International Steam Table)",
symbol = "mcal<sub>IT</sub>",
utype = "energy",
scale = 0.0041868,
default = "mJ",
link = "Calorie",
},
["Mcal-th"] = {
name1 = "megacalorie (thermochemical)",
name2 = "megacalories (thermochemical)",
symbol = "Mcal<sub>th</sub>",
utype = "energy",
scale = 4184000,
default = "MJ",
link = "Calorie",
},
["mcal-th"] = {
name1 = "millicalorie (thermochemical)",
name2 = "millicalories (thermochemical)",
symbol = "mcal<sub>th</sub>",
utype = "energy",
scale = 0.004184,
default = "mJ",
link = "Calorie",
},
["Merg"] = {
name1 = "megaerg",
symbol = "Merg",
utype = "energy",
scale = 0.1,
default = "J",
link = "Erg",
},
["merg"] = {
name1 = "millierg",
symbol = "merg",
utype = "energy",
scale = 0.0000000001,
default = "μJ",
link = "Erg",
},
["MeV"] = {
name1 = "megaelectronvolt",
symbol = "MeV",
utype = "energy",
scale = 1.602176487e-13,
default = "pJ",
link = "Electronvolt",
},
["meV"] = {
name1 = "millielectronvolt",
symbol = "meV",
utype = "energy",
scale = 1.602176487e-22,
default = "zJ",
link = "Electronvolt",
},
["MMBtu"] = {
name1 = "million British thermal units",
name2 = "million British thermal units",
symbol = "MMBtu",
utype = "energy",
scale = 1055055852.62,
default = "GJ",
link = "British thermal unit",
},
["Mt(TNT)"] = {
name1 = "megatonne",
name1_us = "megaton",
symbol = "Mt",
utype = "energy",
scale = 4.184e15,
default = "PJ",
link = "TNT equivalent",
},
["Mtoe"] = {
name1 = "megatonne of oil equivalent",
name2 = "megatonnes of oil equivalent",
symbol = "Mtoe",
utype = "energy",
scale = 4.1868e16,
default = "PJ",
link = "Tonne of oil equivalent",
},
["MtonTNT"] = {
name1 = "megaton of TNT",
name2 = "megatons of TNT",
symbol = "Mt",
utype = "energy",
scale = 4.184e15,
default = "PJ",
link = "TNT equivalent",
},
["mtonTNT"] = {
name2 = "millitons of TNT",
symbol = "milliton of TNT",
usename = 1,
utype = "energy",
scale = 4184000,
default = "MJ",
link = "TNT equivalent",
},
["MtTNT"] = {
name2 = "megatonnes of TNT",
symbol = "megatonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e15,
default = "PJ",
link = "TNT equivalent",
},
["mtTNT"] = {
name2 = "millitonnes of TNT",
symbol = "millitonne of TNT",
usename = 1,
utype = "energy",
scale = 4184000,
default = "MJ",
link = "TNT equivalent",
},
["MW.h"] = {
name1 = "megawatt-hour",
symbol = "MW⋅h",
utype = "energy",
scale = 3600000000,
default = "GJ",
link = "Watt-hour",
},
["mW.h"] = {
name1 = "milliwatt-hour",
symbol = "mW⋅h",
utype = "energy",
scale = 3.6,
default = "J",
link = "Watt-hour",
},
["MWh"] = {
name1 = "megawatt-hour",
symbol = "MWh",
utype = "energy",
scale = 3600000000,
default = "GJ",
link = "Watt-hour",
},
["mWh"] = {
name1 = "milliwatt-hour",
symbol = "mWh",
utype = "energy",
scale = 3.6,
default = "J",
link = "Watt-hour",
},
["neV"] = {
name1 = "nanoelectronvolt",
symbol = "neV",
utype = "energy",
scale = 1.602176487e-28,
default = "yJ",
link = "Electronvolt",
},
["PeV"] = {
name1 = "petaelectronvolt",
symbol = "PeV",
utype = "energy",
scale = 0.0001602176487,
default = "mJ",
link = "Electronvolt",
},
["peV"] = {
name1 = "picoelectronvolt",
symbol = "peV",
utype = "energy",
scale = 1.602176487e-31,
default = "yJ",
link = "Electronvolt",
},
["PSh"] = {
name1 = "Pferdestärkenstunde",
symbol = "PSh",
utype = "energy",
scale = 2647795.5,
default = "kWh",
},
["quad"] = {
name1 = "quadrillion British thermal units",
name2 = "quadrillion British thermal units",
symbol = "quad",
utype = "energy",
scale = 1.054804e18,
default = "EJ",
link = "Quad (unit)",
},
["Ry"] = {
name1 = "rydberg",
symbol = "Ry",
utype = "energy",
scale = 2.1798741e-18,
default = "eV",
link = "Rydberg constant",
},
["scf"] = {
name1 = "standard cubic foot",
name2 = "standard cubic feet",
symbol = "scf",
utype = "energy",
scale = 2869.2044809344,
default = "kJ",
},
["scfoot"] = {
name1 = "standard cubic foot",
name2 = "standard cubic foot",
symbol = "scf",
utype = "energy",
scale = 2869.2044809344,
default = "kJ",
},
["t(TNT)"] = {
name1 = "tonne",
name1_us = "ton",
symbol = "t",
utype = "energy",
scale = 4184000000,
default = "GJ",
link = "TNT equivalent",
},
["TeV"] = {
name1 = "teraelectronvolt",
symbol = "TeV",
utype = "energy",
scale = 1.602176487e-7,
default = "μJ",
link = "Electronvolt",
},
["th"] = {
name1 = "thermie",
symbol = "th",
utype = "energy",
scale = 4186800,
default = "MJ",
link = "Conversion of units#Energy",
},
["thm-EC"] = {
name1 = "therm (EC)",
name2 = "therms (EC)",
symbol = "thm (EC)",
utype = "energy",
scale = 105506000,
default = "MJ",
link = "Therm",
},
["thm-UK"] = {
name1 = "therm (UK)",
name2 = "therms (UK)",
symbol = "thm (UK)",
utype = "energy",
scale = 105505585.257348,
default = "MJ",
link = "Therm",
},
["thm-US"] = {
name1 = "therm (US)",
name1_us = "therm (U.S.)",
name2 = "therms (US)",
name2_us = "therms (U.S.)",
symbol = "thm (US)",
sym_us = "thm (U.S.)",
utype = "energy",
scale = 105480400,
default = "MJ",
link = "Therm",
},
["toe"] = {
name1 = "tonne of oil equivalent",
name2 = "tonnes of oil equivalent",
symbol = "toe",
utype = "energy",
scale = 41868000000,
default = "GJ",
},
["tonTNT"] = {
name2 = "tons of TNT",
symbol = "ton of TNT",
usename = 1,
utype = "energy",
scale = 4184000000,
default = "GJ",
link = "TNT equivalent",
},
["tTNT"] = {
name2 = "tonnes of TNT",
symbol = "tonne of TNT",
usename = 1,
utype = "energy",
scale = 4184000000,
default = "GJ",
link = "TNT equivalent",
},
["TtonTNT"] = {
name2 = "teratons of TNT",
symbol = "teraton of TNT",
usename = 1,
utype = "energy",
scale = 4.184e21,
default = "ZJ",
link = "TNT equivalent",
},
["TtTNT"] = {
name2 = "teratonnes of TNT",
symbol = "teratonne of TNT",
usename = 1,
utype = "energy",
scale = 4.184e21,
default = "ZJ",
link = "TNT equivalent",
},
["TW.h"] = {
name1 = "terawatt-hour",
symbol = "TW⋅h",
utype = "energy",
scale = 3.6e15,
default = "PJ",
link = "Watt-hour",
},
["TWh"] = {
name1 = "terawatt-hour",
symbol = "TWh",
utype = "energy",
scale = 3.6e15,
default = "PJ",
link = "Watt-hour",
},
["W.h"] = {
name1 = "watt-hour",
symbol = "W⋅h",
utype = "energy",
scale = 3600,
default = "kJ",
},
["Wh"] = {
name1 = "watt-hour",
symbol = "Wh",
utype = "energy",
scale = 3600,
default = "kJ",
},
["μerg"] = {
name1 = "microerg",
symbol = "μerg",
utype = "energy",
scale = 1e-13,
default = "nJ",
link = "Erg",
},
["μeV"] = {
name1 = "microelectronvolt",
symbol = "μeV",
utype = "energy",
scale = 1.602176487e-25,
default = "yJ",
link = "Electronvolt",
},
["μW.h"] = {
name1 = "microwatt-hour",
symbol = "μW⋅h",
utype = "energy",
scale = 0.0036,
default = "mJ",
link = "Watt-hour",
},
["μWh"] = {
name1 = "microwatt-hour",
symbol = "μWh",
utype = "energy",
scale = 0.0036,
default = "mJ",
link = "Watt-hour",
},
["-kW.h"] = {
target = "kW.h",
link = "Kilowatt hour",
},
["btu"] = {
target = "BTU",
},
["Calorie"] = {
target = "Cal",
},
["ft.lbf"] = {
target = "ftlbf",
},
["ft·lbf"] = {
target = "ftlbf",
},
["g-cal-15"] = {
target = "cal-15",
},
["g-cal-IT"] = {
target = "cal-IT",
},
["g-cal-th"] = {
target = "cal-th",
},
["g-kcal-15"] = {
target = "kcal-15",
},
["g-kcal-IT"] = {
target = "kcal-IT",
},
["g-kcal-th"] = {
target = "kcal-th",
},
["g-Mcal-15"] = {
target = "Mcal-15",
},
["g-mcal-15"] = {
target = "mcal-15",
},
["g-Mcal-IT"] = {
target = "Mcal-IT",
},
["g-mcal-IT"] = {
target = "mcal-IT",
},
["g-Mcal-th"] = {
target = "Mcal-th",
},
["g-mcal-th"] = {
target = "mcal-th",
},
["GW-h"] = {
target = "GW.h",
},
["GW·h"] = {
target = "GW.h",
},
["Hartree"] = {
target = "Eh",
},
["hp.h"] = {
target = "hph",
},
["in.lb-f"] = {
target = "inlb-f",
},
["in.lbf"] = {
target = "inlbf",
},
["in.oz-f"] = {
target = "inoz-f",
},
["in.ozf"] = {
target = "inozf",
},
["kbboe"] = {
target = "kBOE",
symbol = "kbboe",
},
["kg-cal-15"] = {
target = "Cal-15",
},
["kg-cal-IT"] = {
target = "Cal-IT",
},
["kg-cal-th"] = {
target = "Cal-th",
},
["kW-h"] = {
target = "kW.h",
},
["kW·h"] = {
target = "kW.h",
},
["MW-h"] = {
target = "MW.h",
},
["mW-h"] = {
target = "mW.h",
},
["MW·h"] = {
target = "MW.h",
},
["TW-h"] = {
target = "TW.h",
},
["uerg"] = {
target = "μerg",
},
["ueV"] = {
target = "μeV",
},
["uW-h"] = {
target = "μW.h",
},
["uW.h"] = {
target = "μW.h",
},
["uWh"] = {
target = "μWh",
},
["W-h"] = {
target = "W.h",
},
["eVpar"] = {
_name1 = "electronvolt",
_symbol = "eV",
utype = "energy per chemical amount",
scale = 96485.329522144166,
prefixes = 1,
default = "kcal/mol",
link = "Electronvolt",
},
["kcal/mol"] = {
per = { "kcal", "mol" },
utype = "energy per chemical amount",
default = "kJ/mol",
link = "Kilocalorie per mole",
},
["kJ/mol"] = {
per = { "kJ", "mol" },
utype = "energy per chemical amount",
default = "kcal/mol",
link = "Joule per mole",
},
["kWh/100 km"] = {
name1 = "kilowatt-hour per 100 kilometres",
name1_us = "kilowatt-hour per 100 kilometers",
name2 = "kilowatt-hours per 100 kilometres",
name2_us = "kilowatt-hours per 100 kilometers",
symbol = "kW⋅h/100 km",
utype = "energy per unit length",
scale = 36,
default = "MJ/km kWh/mi",
link = "Watt-hour",
},
["kWh/100 mi"] = {
name1 = "kilowatt-hour per 100 miles",
name2 = "kilowatt-hours per 100 miles",
symbol = "kW⋅h/100 mi",
utype = "energy per unit length",
scale = 22.3694,
default = "mpge",
link = "Miles per gallon gasoline equivalent",
},
["MJ/100 km"] = {
name1 = "megajoule per 100 kilometres",
name1_us = "megajoule per 100 kilometers",
name2 = "megajoules per 100 kilometres",
name2_us = "megajoules per 100 kilometers",
symbol = "MJ/100 km",
utype = "energy per unit length",
scale = 10,
default = "BTU/mi",
link = "British thermal unit",
},
["mpge"] = {
name1 = "mile per gallon gasoline equivalent",
name2 = "miles per gallon gasoline equivalent",
symbol = "mpg‑e",
utype = "energy per unit length",
scale = 13e-6,
invert = -1,
iscomplex= true,
default = "kWh/100 mi",
link = "Miles per gallon gasoline equivalent",
},
["BTU/mi"] = {
per = { "BTU", "mi" },
utype = "energy per unit length",
default = "v > 1525 ! M ! k ! J/km",
},
["kJ/km"] = {
per = { "kJ", "km" },
utype = "energy per unit length",
default = "BTU/mi",
},
["kWh/km"] = {
per = { "-kW.h", "km" },
utype = "energy per unit length",
default = "MJ/km kWh/mi",
},
["kWh/mi"] = {
per = { "-kW.h", "mi" },
utype = "energy per unit length",
default = "kWh/km MJ/km",
},
["MJ/km"] = {
per = { "MJ", "km" },
utype = "energy per unit length",
default = "BTU/mi",
},
["mpg-e"] = {
target = "mpge",
},
["BTU/lb"] = {
name1 = "British thermal unit per pound",
name2 = "British thermal units per pound",
symbol = "BTU/lb",
utype = "energy per unit mass",
scale = 429.92261414790346,
default = "kJ/kg",
link = "British thermal unit",
},
["cal/g"] = {
name1 = "calorie per gram",
name2 = "calories per gram",
symbol = "cal/g",
utype = "energy per unit mass",
scale = 4184,
default = "J/g",
},
["GJ/kg"] = {
name1 = "gigajoule per kilogram",
name2 = "gigajoules per kilogram",
symbol = "GJ/kg",
utype = "energy per unit mass",
scale = 1e9,
default = "ktTNT/t",
link = "Specific energy",
},
["J/g"] = {
name1 = "joule per gram",
name2 = "joules per gram",
symbol = "J/g",
utype = "energy per unit mass",
scale = 1000,
default = "kcal/g",
link = "Specific energy",
},
["kcal/g"] = {
name1 = "kilocalorie per gram",
name2 = "kilocalories per gram",
symbol = "kcal/g",
utype = "energy per unit mass",
scale = 4184000,
default = "kJ/g",
},
["kJ/g"] = {
name1 = "kilojoule per gram",
name2 = "kilojoules per gram",
symbol = "kJ/g",
utype = "energy per unit mass",
scale = 1000000,
default = "kcal/g",
link = "Specific energy",
},
["kJ/kg"] = {
name1 = "kilojoule per kilogram",
name2 = "kilojoules per kilogram",
symbol = "kJ/kg",
utype = "energy per unit mass",
scale = 1000,
default = "BTU/lb",
link = "Specific energy",
},
["ktonTNT/MT"] = {
name2 = "kilotons of TNT per metric ton",
symbol = "kiloton of TNT per metric ton",
usename = 1,
utype = "energy per unit mass",
scale = 4184000000,
default = "GJ/kg",
link = "TNT equivalent",
},
["ktTNT/t"] = {
name2 = "kilotonnes of TNT per tonne",
symbol = "kilotonne of TNT per tonne",
usename = 1,
utype = "energy per unit mass",
scale = 4184000000,
default = "GJ/kg",
link = "TNT equivalent",
},
["MtonTNT/MT"] = {
name2 = "megatons of TNT per metric ton",
symbol = "megaton of TNT per metric ton",
usename = 1,
utype = "energy per unit mass",
scale = 4.184e12,
default = "TJ/kg",
link = "TNT equivalent",
},
["MtTNT/MT"] = {
name2 = "megatonnes of TNT per tonne",
symbol = "megatonne of TNT per tonne",
usename = 1,
utype = "energy per unit mass",
scale = 4.184e12,
default = "TJ/kg",
link = "TNT equivalent",
},
["TJ/kg"] = {
name1 = "terajoule per kilogram",
name2 = "terajoules per kilogram",
symbol = "TJ/kg",
utype = "energy per unit mass",
scale = 1e12,
default = "MtTNT/MT",
link = "Specific energy",
},
["Cal/g"] = {
per = { "Cal", "g" },
utype = "energy per unit mass",
default = "kJ/g",
},
["BTU/cuft"] = {
per = { "BTU", "cuft" },
utype = "energy per unit volume",
default = "kJ/L",
},
["Cal/12USoz(mL)serve"] = {
per = { "Cal", "-12USoz(mL)serve" },
utype = "energy per unit volume",
default = "kJ/L",
},
["Cal/12USoz(ml)serve"] = {
per = { "Cal", "-12USoz(ml)serve" },
utype = "energy per unit volume",
default = "kJ/l",
},
["Cal/12USozserve"] = {
per = { "Cal", "-12USozserve" },
utype = "energy per unit volume",
default = "kJ/L",
},
["Cal/USoz"] = {
per = { "Cal", "USoz" },
utype = "energy per unit volume",
default = "kJ/ml",
},
["kJ/L"] = {
per = { "kJ", "L" },
utype = "energy per unit volume",
default = "BTU/cuft",
},
["kJ/l"] = {
per = { "kJ", "l" },
utype = "energy per unit volume",
default = "BTU/cuft",
},
["kJ/ml"] = {
per = { "kJ", "ml" },
utype = "energy per unit volume",
default = "Cal/USoz",
},
["MJ/m3"] = {
per = { "MJ", "m3" },
utype = "energy per unit volume",
default = "BTU/cuft",
},
["Sv"] = {
_name1 = "sievert",
_symbol = "Sv",
utype = "equivalent radiation dose",
scale = 1,
prefixes = 1,
default = "rem",
link = "Sievert",
},
["rem"] = {
_name1 = "rem",
_symbol = "rem",
utype = "equivalent radiation dose",
scale = 0.01,
prefixes = 1,
default = "Sv",
link = "Roentgen equivalent man",
},
["g/km"] = {
name1 = "gram per kilometre",
name1_us = "gram per kilometer",
name2 = "grams per kilometre",
name2_us = "grams per kilometer",
symbol = "g/km",
utype = "exhaust emission",
scale = 1e-6,
default = "oz/mi",
link = "Exhaust gas",
},
["g/mi"] = {
name1 = "gram per mile",
name2 = "grams per mile",
symbol = "g/mi",
utype = "exhaust emission",
scale = 6.2137119223733397e-7,
default = "g/km",
link = "Exhaust gas",
},
["gCO2/km"] = {
name1 = "gram of CO<sub>2</sub> per kilometre",
name1_us = "gram of CO<sub>2</sub> per kilometer",
name2 = "grams of CO<sub>2</sub> per kilometre",
name2_us = "grams of CO<sub>2</sub> per kilometer",
symbol = "g(CO<sub>2</sub>)/km",
utype = "exhaust emission",
scale = 1e-6,
default = "ozCO2/mi",
link = "Exhaust gas",
},
["gCO2/mi"] = {
name1 = "gram of CO<sub>2</sub> per mile",
name2 = "grams of CO<sub>2</sub> per mile",
symbol = "g(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 6.2137119223733397e-7,
default = "gCO2/km",
link = "Exhaust gas",
},
["kg/km"] = {
name1 = "kilogram per kilometre",
name1_us = "kilogram per kilometer",
name2 = "kilograms per kilometre",
name2_us = "kilograms per kilometer",
symbol = "kg/km",
utype = "exhaust emission",
scale = 0.001,
default = "lb/mi",
link = "Exhaust gas",
},
["kgCO2/km"] = {
name1 = "kilogram of CO<sub>2</sub> per kilometre",
name1_us = "kilogram of CO<sub>2</sub> per kilometer",
name2 = "kilograms of CO<sub>2</sub> per kilometre",
name2_us = "kilograms of CO<sub>2</sub> per kilometer",
symbol = "kg(CO<sub>2</sub>)/km",
utype = "exhaust emission",
scale = 0.001,
default = "lbCO2/mi",
link = "Exhaust gas",
},
["lb/mi"] = {
name1 = "pound per mile",
name2 = "pounds per mile",
symbol = "lb/mi",
utype = "exhaust emission",
scale = 0.00028184923173665794,
default = "kg/km",
link = "Exhaust gas",
},
["lbCO2/mi"] = {
name1 = "pound of CO<sub>2</sub> per mile",
name2 = "pounds of CO<sub>2</sub> per mile",
symbol = "lb(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 0.00028184923173665794,
default = "kgCO2/km",
link = "Exhaust gas",
},
["oz/mi"] = {
name1 = "ounce per mile",
name2 = "ounces per mile",
symbol = "oz/mi",
utype = "exhaust emission",
scale = 1.7615576983541121e-5,
default = "g/km",
link = "Exhaust gas",
},
["ozCO2/mi"] = {
name1 = "ounce of CO<sub>2</sub> per mile",
name2 = "ounces of CO<sub>2</sub> per mile",
symbol = "oz(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 1.7615576983541121e-5,
default = "gCO2/km",
link = "Exhaust gas",
},
["cuft/a"] = {
name1 = "cubic foot per annum",
name2 = "cubic feet per annum",
symbol = "cu ft/a",
utype = "flow",
scale = 8.9730672142368242e-10,
default = "m3/a",
link = "Cubic foot per second",
},
["cuft/d"] = {
name1 = "cubic foot per day",
name2 = "cubic feet per day",
symbol = "cu ft/d",
utype = "flow",
scale = 3.2774128000000003e-7,
default = "m3/d",
link = "Cubic foot per second",
},
["cuft/h"] = {
name1 = "cubic foot per hour",
name2 = "cubic feet per hour",
symbol = "cu ft/h",
utype = "flow",
scale = 7.8657907200000004e-6,
default = "m3/h",
link = "Cubic foot per second",
},
["cuft/min"] = {
name1 = "cubic foot per minute",
name2 = "cubic feet per minute",
symbol = "cu ft/min",
utype = "flow",
scale = 0.00047194744319999999,
default = "m3/min",
},
["cuft/s"] = {
name1 = "cubic foot per second",
name2 = "cubic feet per second",
symbol = "cu ft/s",
utype = "flow",
scale = 28316846592e-12,
default = "m3/s",
},
["cumi/a"] = {
name1 = "cubic mile per annum",
name2 = "cubic miles per annum",
symbol = "cu mi/a",
utype = "flow",
scale = 132.08171170940057,
default = "km3/a",
link = "Cubic foot per second",
},
["cuyd/h"] = {
name1 = "cubic yard per hour",
name2 = "cubic yards per hour",
symbol = "cuyd/h",
utype = "flow",
scale = 0.00021237634944000001,
default = "m3/h",
link = "Cubic foot per second",
},
["cuyd/s"] = {
name1 = "cubic yard per second",
name2 = "cubic yards per second",
symbol = "cu yd/s",
utype = "flow",
scale = 0.76455485798400002,
default = "m3/s",
},
["Goilbbl/a"] = {
name1 = "billion barrels per year",
name2 = "billion barrels per year",
symbol = "Gbbl/a",
utype = "flow",
scale = 5.0380033629933836,
default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3/a",
link = "Barrel per day",
},
["impgal/h"] = {
name1 = "imperial gallon per hour",
name2 = "imperial gallons per hour",
symbol = "imp gal/h",
utype = "flow",
scale = 1.2628027777777779e-6,
default = "m3/h",
link = "Gallon",
},
["impgal/min"] = {
name1 = "imperial gallon per minute",
name2 = "imperial gallons per minute",
symbol = "imp gal/min",
utype = "flow",
scale = 7.5768166666666671e-5,
default = "m3/s",
link = "Gallon",
},
["impgal/s"] = {
name1 = "imperial gallon per second",
name2 = "imperial gallons per second",
symbol = "impgal/s",
utype = "flow",
scale = 0.00454609,
default = "m3/s",
link = "Imperial gallons per second",
},
["km3/a"] = {
name1 = "cubic kilometre per annum",
name1_us = "cubic kilometer per annum",
name2 = "cubic kilometres per annum",
name2_us = "cubic kilometers per annum",
symbol = "km<sup>3</sup>/a",
utype = "flow",
scale = 31.68808781402895,
default = "cumi/a",
link = "Cubic metre per second",
},
["km3/d"] = {
name1 = "cubic kilometre per day",
name1_us = "cubic kilometer per day",
name2 = "cubic kilometres per day",
name2_us = "cubic kilometers per day",
symbol = "km<sup>3</sup>/d",
utype = "flow",
scale = 11574.074074074075,
default = "cuft/d",
link = "Cubic metre per second",
},
["koilbbl/a"] = {
name1 = "thousand barrels per year",
name2 = "thousand barrels per year",
symbol = "kbbl/a",
utype = "flow",
scale = 5.0380033629933841e-6,
default = "v * 1.58987294928 < 10 ! ! e3 ! m3/a",
link = "Barrel per day",
},
["koilbbl/d"] = {
name1 = "thousand barrels per day",
name2 = "thousand barrels per day",
symbol = "kbbl/d",
utype = "flow",
scale = 0.0018401307283333335,
default = "v * 1.58987294928 < 10 ! ! e3 ! m3/d",
link = "Barrel per day",
},
["L/h"] = {
name1 = "litre per hour",
name1_us = "liter per hour",
name2 = "litres per hour",
name2_us = "liters per hour",
symbol = "L/h",
utype = "flow",
scale = 2.7777777777777776e-7,
default = "impgal/h USgal/h",
link = "Cubic metre per second",
},
["L/min"] = {
name1 = "litre per minute",
name1_us = "liter per minute",
name2 = "litres per minute",
name2_us = "liters per minute",
symbol = "L/min",
utype = "flow",
scale = 1.6666666666666667e-5,
default = "impgal/min USgal/min",
link = "Cubic metre per second",
},
["L/s"] = {
name1 = "litre per second",
name1_us = "liter per second",
name2 = "litres per second",
name2_us = "liters per second",
symbol = "L/s",
utype = "flow",
scale = 0.001,
default = "cuft/s",
link = "Cubic metre per second",
},
["m3/a"] = {
name1 = "cubic metre per annum",
name1_us = "cubic meter per annum",
name2 = "cubic metres per annum",
name2_us = "cubic meters per annum",
symbol = "m<sup>3</sup>/a",
utype = "flow",
scale = 3.1688087814028947e-8,
default = "cuft/a",
link = "Cubic metre per second",
},
["m3/d"] = {
name1 = "cubic metre per day",
name1_us = "cubic meter per day",
name2 = "cubic metres per day",
name2_us = "cubic meters per day",
symbol = "m<sup>3</sup>/d",
utype = "flow",
scale = 1.1574074074074073e-5,
default = "cuft/d",
link = "Cubic metre per second",
},
["m3/h"] = {
name1 = "cubic metre per hour",
name1_us = "cubic meter per hour",
name2 = "cubic metres per hour",
name2_us = "cubic meters per hour",
symbol = "m<sup>3</sup>/h",
utype = "flow",
scale = 0.00027777777777777778,
default = "cuft/h",
link = "Cubic metre per second",
},
["m3/min"] = {
name1 = "cubic metre per minute",
name1_us = "cubic meter per minute",
name2 = "cubic metres per minute",
name2_us = "cubic meters per minute",
symbol = "m<sup>3</sup>/min",
utype = "flow",
scale = 0.016666666666666666,
default = "cuft/min",
link = "Cubic metre per second",
},
["m3/s"] = {
name1 = "cubic metre per second",
name1_us = "cubic meter per second",
name2 = "cubic metres per second",
name2_us = "cubic meters per second",
symbol = "m<sup>3</sup>/s",
utype = "flow",
scale = 1,
default = "cuft/s",
},
["Moilbbl/a"] = {
name1 = "million barrels per year",
name2 = "million barrels per year",
symbol = "Mbbl/a",
utype = "flow",
scale = 0.0050380033629933837,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/a",
link = "Barrel per day",
},
["Moilbbl/d"] = {
name1 = "million barrels per day",
name2 = "million barrels per day",
symbol = "Mbbl/d",
utype = "flow",
scale = 1.8401307283333335,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/d",
link = "Barrel per day",
},
["oilbbl/a"] = {
name1 = "barrel per year",
name2 = "barrels per year",
symbol = "bbl/a",
utype = "flow",
scale = 5.0380033629933841e-9,
default = "m3/a",
link = "Barrel per day",
},
["oilbbl/d"] = {
name1 = "barrel per day",
name2 = "barrels per day",
symbol = "bbl/d",
utype = "flow",
scale = 1.8401307283333336e-6,
default = "m3/d",
},
["Toilbbl/a"] = {
name1 = "trillion barrels per year",
name2 = "trillion barrels per year",
symbol = "Tbbl/a",
utype = "flow",
scale = 5038.0033629933832,
default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3/a",
link = "Barrel per day",
},
["U.S.gal/d"] = {
name1 = "U.S. gallon per day",
name2 = "U.S. gallons per day",
symbol = "U.S. gal/d",
utype = "flow",
scale = 4.3812636388888893e-8,
default = "m3/s",
customary= 1,
},
["U.S.gal/h"] = {
name1 = "gallon per hour",
name2 = "gallons per hour",
symbol = "gal/h",
utype = "flow",
scale = 1.0515032733333334e-6,
default = "m3/h",
link = "Gallon",
customary= 2,
},
["U.S.gal/min"] = {
name1 = "U.S. gallon per minute",
name2 = "U.S. gallons per minute",
symbol = "U.S. gal/min",
utype = "flow",
scale = 6.3090196400000003e-5,
default = "m3/s",
link = "Gallon",
},
["USgal/a"] = {
name1 = "US gallon per year",
name2 = "US gallons per year",
symbol = "US gal/a",
utype = "flow",
scale = 1.1995246102365199e-10,
default = "m3/s",
},
["USgal/d"] = {
name1 = "US gallon per day",
name2 = "US gallons per day",
symbol = "US gal/d",
utype = "flow",
scale = 4.3812636388888893e-8,
default = "m3/s",
},
["USgal/h"] = {
name1 = "gallon per hour",
name2 = "gallons per hour",
symbol = "gal/h",
utype = "flow",
scale = 1.0515032733333334e-6,
default = "m3/h",
link = "Gallon",
customary= 1,
},
["USgal/min"] = {
name1 = "US gallon per minute",
name2 = "US gallons per minute",
symbol = "US gal/min",
utype = "flow",
scale = 6.3090196400000003e-5,
default = "m3/s",
link = "Gallon",
},
["USgal/s"] = {
name1 = "US gallon per second",
name1_us = "U.S. gallon per second",
name2 = "US gallons per second",
name2_us = "U.S. gallons per second",
symbol = "USgal/s",
utype = "flow",
scale = 0.003785411784,
default = "m3/s",
link = "US gallons per second",
},
["ft3/a"] = {
target = "cuft/a",
},
["ft3/d"] = {
target = "cuft/d",
},
["ft3/h"] = {
target = "cuft/h",
},
["ft3/s"] = {
target = "cuft/s",
},
["Gcuft/a"] = {
target = "e9cuft/a",
},
["Gcuft/d"] = {
target = "e9cuft/d",
},
["kcuft/a"] = {
target = "e3cuft/a",
},
["kcuft/d"] = {
target = "e3cuft/d",
},
["kcuft/s"] = {
target = "e3cuft/s",
},
["Mcuft/a"] = {
target = "e6cuft/a",
},
["Mcuft/d"] = {
target = "e6cuft/d",
},
["Mcuft/s"] = {
target = "e6cuft/s",
},
["m³/s"] = {
target = "m3/s",
},
["Tcuft/a"] = {
target = "e12cuft/a",
},
["Tcuft/d"] = {
target = "e12cuft/d",
},
["u.s.gal/min"] = {
target = "U.S.gal/min",
},
["usgal/min"] = {
target = "USgal/min",
},
["-LTf"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "LTf",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["-STf"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "STf",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["dyn"] = {
name1 = "dyne",
symbol = "dyn",
utype = "force",
scale = 0.00001,
default = "gr-f",
},
["g-f"] = {
name1 = "gram-force",
name2 = "grams-force",
symbol = "g<sub>f</sub>",
utype = "force",
scale = 0.00980665,
default = "mN oz-f",
link = "Kilogram-force",
},
["gf"] = {
name1 = "gram-force",
name2 = "grams-force",
symbol = "gf",
utype = "force",
scale = 0.00980665,
default = "mN ozf",
link = "Kilogram-force",
},
["gr-f"] = {
name1 = "grain-force",
name2 = "grains-force",
symbol = "gr<sub>f</sub>",
utype = "force",
scale = 0.0006354602307515,
default = "μN",
link = "Pound (force)",
},
["grf"] = {
name1 = "grain-force",
name2 = "grains-force",
symbol = "grf",
utype = "force",
scale = 0.0006354602307515,
default = "μN",
link = "Pound (force)",
},
["kdyn"] = {
name1 = "kilodyne",
symbol = "kdyn",
utype = "force",
scale = 0.01,
default = "oz-f",
link = "Dyne",
},
["kg-f"] = {
name1 = "kilogram-force",
name2 = "kilograms-force",
symbol = "kg<sub>f</sub>",
utype = "force",
scale = 9.80665,
default = "N lb-f",
},
["kgf"] = {
name1 = "kilogram-force",
name2 = "kilograms-force",
symbol = "kgf",
utype = "force",
scale = 9.80665,
default = "N lbf",
},
["kp"] = {
name1 = "kilopond",
symbol = "kp",
utype = "force",
scale = 9.80665,
default = "N lb-f",
link = "Kilogram-force",
},
["L/T-f"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "L/T<sub>f</sub>",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["L/Tf"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "L/Tf",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["lb-f"] = {
name1 = "pound-force",
name2 = "pounds-force",
symbol = "lb<sub>f</sub>",
utype = "force",
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["lbf"] = {
name1 = "pound-force",
name2 = "pounds-force",
symbol = "lbf",
utype = "force",
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["lb(f)"] = {
name1 = "pound",
symbol = "lb",
utype = "force",
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["LT-f"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "LT<sub>f</sub>",
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["LTf"] = {
name1 = "long ton-force",
name2 = "long tons-force",
symbol = "LTf",
usename = 1,
utype = "force",
scale = 9964.01641818352,
default = "kN",
},
["Mdyn"] = {
name1 = "megadyne",
symbol = "Mdyn",
utype = "force",
scale = 10,
default = "lb-f",
link = "Dyne",
},
["mdyn"] = {
name1 = "millidyne",
symbol = "mdyn",
utype = "force",
scale = 0.00000001,
default = "gr-f",
link = "Dyne",
},
["mg-f"] = {
name1 = "milligram-force",
name2 = "milligrams-force",
symbol = "mg<sub>f</sub>",
utype = "force",
scale = 0.00000980665,
default = "μN gr-f",
link = "Kilogram-force",
},
["mgf"] = {
name1 = "milligram-force",
name2 = "milligrams-force",
symbol = "mgf",
utype = "force",
scale = 0.00000980665,
default = "μN grf",
link = "Kilogram-force",
},
["Mp"] = {
name1 = "megapond",
symbol = "Mp",
utype = "force",
scale = 9806.65,
default = "kN LT-f ST-f",
link = "Kilogram-force",
},
["mp"] = {
name1 = "millipond",
symbol = "mp",
utype = "force",
scale = 0.00000980665,
default = "μN gr-f",
link = "Kilogram-force",
},
["N"] = {
_name1 = "newton",
_symbol = "N",
utype = "force",
scale = 1,
prefixes = 1,
default = "lb-f",
link = "Newton (unit)",
},
["oz-f"] = {
name1 = "ounce-force",
name2 = "ounces-force",
symbol = "oz<sub>f</sub>",
utype = "force",
scale = 0.2780138203095378125,
default = "mN",
link = "Pound (force)",
},
["ozf"] = {
name1 = "ounce-force",
name2 = "ounces-force",
symbol = "ozf",
utype = "force",
scale = 0.2780138203095378125,
default = "mN",
link = "Pound (force)",
},
["p"] = {
name1 = "pond",
symbol = "p",
utype = "force",
scale = 0.00980665,
default = "mN oz-f",
link = "Kilogram-force",
},
["pdl"] = {
name1 = "poundal",
symbol = "pdl",
utype = "force",
scale = 0.138254954376,
default = "N",
},
["S/T-f"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "S/T<sub>f</sub>",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["S/Tf"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "S/Tf",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["ST-f"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "ST<sub>f</sub>",
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["STf"] = {
name1 = "short ton-force",
name2 = "short tons-force",
symbol = "STf",
usename = 1,
utype = "force",
scale = 8896.443230521,
default = "kN",
},
["t-f"] = {
name1 = "tonne-force",
name2 = "tonnes-force",
symbol = "t<sub>f</sub>",
utype = "force",
scale = 9806.65,
default = "kN LT-f ST-f",
link = "Ton-force#Tonne-force",
},
["tf"] = {
name1 = "tonne-force",
name2 = "tonnes-force",
symbol = "tf",
utype = "force",
scale = 9806.65,
default = "kN LTf STf",
link = "Ton-force#Tonne-force",
},
["dyne"] = {
target = "dyn",
},
["newtons"] = {
target = "N",
},
["poundal"] = {
target = "pdl",
},
["tonne-force"] = {
target = "tf",
},
["impgal/mi"] = {
per = { "@impgal", "mi" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "l/km USgal/mi",
},
["km/L"] = {
per = { "km", "L" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "mpgimp mpgus",
},
["km/l"] = {
per = { "km", "l" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "mpgimp mpgus",
},
["L/100 km"] = {
per = { "L", "100km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|L/100 km]]",
},
["l/100 km"] = {
per = { "l", "100km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|l/100 km]]",
},
["L/km"] = {
per = { "L", "km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
},
["l/km"] = {
per = { "l", "km" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
},
["mi/impqt"] = {
per = { "mi", "impqt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mi/U.S.qt"] = {
per = { "mi", "U.S.qt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mi/USqt"] = {
per = { "mi", "USqt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mi/usqt"] = {
per = { "mi", "usqt" },
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "km/L",
},
["mpgimp"] = {
per = { "mi", "@impgal" },
symbol = "mpg<sub>‑imp</sub>",
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "L/100 km+mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[Imperial units|imp]]</sub>",
},
["mpgus"] = {
per = { "mi", "+USgal" },
symbol = "mpg<sub>‑US</sub>",
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "L/100 km+mpgimp",
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[United States customary units|US]]</sub>",
},
["U.S.gal/mi"] = {
per = { "*U.S.gal", "mi" },
sp_us = true,
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "l/km impgal/mi",
},
["usgal/mi"] = {
per = { "+USgal", "mi" },
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "l/km impgal/mi",
},
["L/100km"] = {
target = "L/100 km",
},
["l/100km"] = {
target = "l/100 km",
},
["mpg"] = {
shouldbe = "Use %{mpgus%} for miles per US gallon or %{mpgimp%} for miles per imperial gallon (not %{mpg%})",
},
["mpgU.S."] = {
target = "mpgus",
symbol = "mpg<sub>‑U.S.</sub>",
sp_us = true,
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[United States customary units|U.S.]]</sub>",
},
["mpgu.s."] = {
target = "mpgus",
symbol = "mpg<sub>‑U.S.</sub>",
sp_us = true,
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>‑[[United States customary units|U.S.]]</sub>",
},
["mpgUS"] = {
target = "mpgus",
},
["USgal/mi"] = {
target = "usgal/mi",
},
["kPa/m"] = {
per = { "kPa", "-m-frac" },
utype = "fracture gradient",
default = "psi/ft",
},
["psi/ft"] = {
per = { "psi", "-ft-frac" },
utype = "fracture gradient",
default = "kPa/m",
},
["cm/km"] = {
name1 = "centimetre per kilometre",
name1_us = "centimeter per kilometer",
name2 = "centimetres per kilometre",
name2_us = "centimeters per kilometer",
symbol = "cm/km",
utype = "gradient",
scale = 0.00001,
default = "ft/mi",
link = "Grade (slope)",
},
["ft/mi"] = {
name1 = "foot per mile",
name2 = "feet per mile",
symbol = "ft/mi",
utype = "gradient",
scale = 0.00018939393939393939,
default = "v < 5.28 ! c ! ! m/km",
link = "Grade (slope)",
},
["ft/nmi"] = {
name1 = "foot per nautical mile",
name2 = "feet per nautical mile",
symbol = "ft/nmi",
utype = "gradient",
scale = 0.00016457883369330455,
default = "v < 6.076 ! c ! ! m/km",
link = "Grade (slope)",
},
["in/ft"] = {
name1 = "inch per foot",
name2 = "inches per foot",
symbol = "in/ft",
utype = "gradient",
scale = 0.083333333333333329,
default = "mm/m",
link = "Grade (slope)",
},
["in/mi"] = {
name1 = "inch per mile",
name2 = "inches per mile",
symbol = "in/mi",
utype = "gradient",
scale = 1.5782828282828283e-5,
default = "v < 0.6336 ! m ! c ! m/km",
link = "Grade (slope)",
},
["m/km"] = {
name1 = "metre per kilometre",
name1_us = "meter per kilometer",
name2 = "metres per kilometre",
name2_us = "meters per kilometer",
symbol = "m/km",
utype = "gradient",
scale = 0.001,
default = "ft/mi",
link = "Grade (slope)",
},
["mm/km"] = {
name1 = "millimetre per kilometre",
name1_us = "millimeter per kilometer",
name2 = "millimetres per kilometre",
name2_us = "millimeters per kilometer",
symbol = "mm/km",
utype = "gradient",
scale = 0.000001,
default = "in/mi",
link = "Grade (slope)",
},
["mm/m"] = {
name1 = "millimetre per metre",
name1_us = "millimeter per meter",
name2 = "millimetres per metre",
name2_us = "millimeters per meter",
symbol = "mm/m",
utype = "gradient",
scale = 0.001,
default = "in/ft",
link = "Grade (slope)",
},
["admi"] = {
name1 = "admiralty mile",
symbol = "nmi (admiralty)",
utype = "length",
scale = 1853.184,
default = "km mi",
link = "Nautical mile",
},
["AU"] = {
name1 = "astronomical unit",
symbol = "AU",
utype = "length",
scale = 149597870700,
default = "km mi",
},
["Brnmi"] = {
name1 = "British nautical mile",
symbol = "(Brit) nmi",
utype = "length",
scale = 1853.184,
default = "km mi",
link = "Nautical mile",
},
["bu"] = {
name2 = "bu",
symbol = "bu",
usename = 1,
utype = "length",
scale = 0.0030303030303030303,
default = "mm",
link = "Japanese units of measurement#Length",
},
["ch"] = {
name1 = "chain",
symbol = "ch",
utype = "length",
scale = 20.1168,
default = "ft m",
subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
link = "Chain (unit)",
},
["chlk"] = {
name1 = "[[Chain (unit)|chain]]",
symbol = "[[Chain (unit)|ch]]",
utype = "length",
scale = 20.1168,
default = "ft m",
link = "",
},
["chain"] = {
symbol = "chain",
usename = 1,
utype = "length",
scale = 20.1168,
default = "ft m",
subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
link = "Chain (unit)",
},
["chainlk"] = {
symbol = "[[Chain (unit)|chain]]",
usename = 1,
utype = "length",
scale = 20.1168,
default = "ft m",
link = "",
},
["dpcm"] = {
name2 = "dot/cm",
symbol = "dot/cm",
utype = "length",
scale = 100,
invert = -1,
iscomplex= true,
default = "dpi",
link = "Dots per inch",
},
["dpi"] = {
name2 = "DPI",
symbol = "DPI",
utype = "length",
scale = 39.370078740157481,
invert = -1,
iscomplex= true,
default = "pitch",
link = "Dots per inch",
},
["fathom"] = {
symbol = "fathom",
usename = 1,
utype = "length",
scale = 1.8288,
default = "ft m",
},
["foot"] = {
name1 = "foot",
name2 = "foot",
symbol = "ft",
utype = "length",
scale = 0.3048,
default = "m",
subdivs = { ["in"] = { 12, default = "m" } },
link = "Foot (unit)",
},
["ft"] = {
name1 = "foot",
name2 = "feet",
symbol = "ft",
utype = "length",
scale = 0.3048,
exception= "integer_more_precision",
default = "m",
subdivs = { ["in"] = { 12, default = "m" } },
link = "Foot (unit)",
},
["furlong"] = {
symbol = "furlong",
usename = 1,
utype = "length",
scale = 201.168,
default = "ft m",
},
["Gly"] = {
name1 = "gigalight-year",
symbol = "Gly",
utype = "length",
scale = 9.4607304725808e24,
default = "Mpc",
link = "Light-year#Definitions",
},
["Gpc"] = {
name1 = "gigaparsec",
symbol = "Gpc",
utype = "length",
scale = 3.0856775814671916e25,
default = "Gly",
link = "Parsec#Megaparsecs and gigaparsecs",
},
["hand"] = {
name1 = "hand",
symbol = "h",
utype = "length",
builtin = "hand",
scale = 0.1016,
iscomplex= true,
default = "in cm",
link = "Hand (unit)",
},
["in"] = {
name1 = "inch",
name2 = "inches",
symbol = "in",
utype = "length",
scale = 0.0254,
exception= "subunit_more_precision",
default = "mm",
},
["inabbreviated"] = {
name2 = "in",
symbol = "in",
utype = "length",
scale = 0.0254,
default = "mm",
link = "Inch",
},
["kly"] = {
name1 = "kilolight-year",
symbol = "kly",
utype = "length",
scale = 9.4607304725808e18,
default = "pc",
link = "Light-year#Definitions",
},
["kpc"] = {
name1 = "kiloparsec",
symbol = "kpc",
utype = "length",
scale = 3.0856775814671916e19,
default = "kly",
link = "Parsec#Parsecs and kiloparsecs",
},
["LD"] = {
name1 = "lunar distance",
symbol = "LD",
utype = "length",
scale = 384403000,
default = "km mi",
link = "Lunar distance (astronomy)",
},
["league"] = {
symbol = "league",
usename = 1,
utype = "length",
scale = 4828.032,
default = "km",
link = "League (unit)",
},
["ly"] = {
name1 = "light-year",
symbol = "ly",
utype = "length",
scale = 9.4607304725808e15,
default = "AU",
},
["m"] = {
_name1 = "metre",
_name1_us= "meter",
_symbol = "m",
utype = "length",
scale = 1,
prefixes = 1,
default = "v > 0 and v < 3 ! ftin ! ft",
link = "Metre",
},
["mi"] = {
name1 = "mile",
symbol = "mi",
utype = "length",
scale = 1609.344,
default = "km",
subdivs = { ["ch"] = { 80, default = "km" }, ["chlk"] = { 80, default = "km" }, ["chain"] = { 80, default = "km" }, ["chainlk"] = { 80, default = "km" }, ["ft"] = { 5280, default = "km" }, ["furlong"] = { 8, default = "km" }, ["yd"] = { 1760, default = "km" } },
},
["mil"] = {
symbol = "mil",
usename = 1,
utype = "length",
scale = 0.0000254,
default = "mm",
link = "Thousandth of an inch",
},
["Mly"] = {
name1 = "megalight-year",
symbol = "Mly",
utype = "length",
scale = 9.4607304725808e21,
default = "kpc",
link = "Light-year#Definitions",
},
["Mpc"] = {
name1 = "megaparsec",
symbol = "Mpc",
utype = "length",
scale = 3.0856775814671916e22,
default = "Mly",
link = "Parsec#Megaparsecs and gigaparsecs",
},
["NM"] = {
name1 = "nautical mile",
symbol = "NM",
utype = "length",
scale = 1852,
default = "km mi",
},
["nmi"] = {
name1 = "nautical mile",
symbol = "nmi",
utype = "length",
scale = 1852,
default = "km mi",
},
["oldUKnmi"] = {
name1 = "nautical mile",
symbol = "nmi",
utype = "length",
scale = 1853.184,
default = "km mi",
},
["oldUSnmi"] = {
name1 = "nautical mile",
symbol = "nmi",
utype = "length",
scale = 1853.24496,
default = "km mi",
},
["pc"] = {
name1 = "parsec",
symbol = "pc",
utype = "length",
scale = 3.0856775814671916e16,
default = "ly",
},
["perch"] = {
name2 = "perches",
symbol = "perch",
usename = 1,
utype = "length",
scale = 5.0292,
default = "ft m",
link = "Rod (unit)",
},
["pitch"] = {
name2 = "μm",
symbol = "μm",
utype = "length",
scale = 1e-6,
default = "dpi",
defkey = "pitch",
linkey = "pitch",
link = "Dots per inch",
},
["pole"] = {
symbol = "pole",
usename = 1,
utype = "length",
scale = 5.0292,
default = "ft m",
link = "Rod (unit)",
},
["pre1954U.S.nmi"] = {
name1 = "(pre-1954 U.S.) nautical mile",
symbol = "(pre‑1954 U.S.) nmi",
utype = "length",
scale = 1853.24496,
default = "km mi",
link = "Nautical mile",
},
["pre1954USnmi"] = {
name1 = "(pre-1954 US) nautical mile",
name1_us = "(pre-1954 U.S.) nautical mile",
symbol = "(pre‑1954 US) nmi",
sym_us = "(pre‑1954 U.S.) nmi",
utype = "length",
scale = 1853.24496,
default = "km mi",
link = "Nautical mile",
},
["rd"] = {
name1 = "rod",
symbol = "rd",
utype = "length",
scale = 5.0292,
default = "ft m",
link = "Rod (unit)",
},
["royal cubit"] = {
name1 = "royal cubit",
symbol = "cu",
utype = "length",
scale = 0.524,
default = "mm",
},
["rtkm"] = {
name1 = "route kilometre",
name1_us = "route kilometer",
symbol = "km",
utype = "length",
scale = 1000,
default = "mi",
link = "Kilometre",
},
["rtmi"] = {
name1 = "route mile",
symbol = "mi",
utype = "length",
scale = 1609.344,
default = "km",
link = "Mile",
},
["shaku"] = {
name2 = "shaku",
symbol = "shaku",
usename = 1,
utype = "length",
scale = 0.30303030303030304,
default = "m",
link = "Shaku (unit)",
},
["sm"] = {
name1 = "smoot",
symbol = "sm",
utype = "length",
scale = 1.70180,
default = "m",
link = "Smoot (unit)",
},
["smi"] = {
name1 = "statute mile",
symbol = "mi",
utype = "length",
scale = 1609.344,
default = "km",
subdivs = { ["chain"] = { 80, default = "km" } },
},
["solar radius"] = {
name1 = "solar radius",
name2 = "solar radii",
symbol = "''R''<sub>☉</sub>",
utype = "length",
scale = 695700e3,
default = "km",
},
["sun"] = {
name2 = "sun",
symbol = "sun",
usename = 1,
utype = "length",
scale = 0.030303030303030304,
default = "mm",
link = "Japanese units of measurement#Length",
},
["thou"] = {
name2 = "thou",
symbol = "thou",
usename = 1,
utype = "length",
scale = 0.0000254,
default = "mm",
link = "Thousandth of an inch",
},
["verst"] = {
symbol = "verst",
usename = 1,
utype = "length",
scale = 1066.8,
default = "km mi",
},
["yd"] = {
name1 = "yard",
symbol = "yd",
utype = "length",
scale = 0.9144,
default = "m",
subdivs = { ["ft"] = { 3, default = "m" } },
},
["μin"] = {
name1 = "microinch",
name2 = "microinches",
symbol = "μin",
utype = "length",
scale = 0.0000000254,
default = "nm",
link = "SI prefix#Non-metric units",
},
["Å"] = {
name1 = "ångström",
symbol = "Å",
utype = "length",
scale = 0.0000000001,
default = "in",
},
["Hz"] = {
_name1 = "hertz",
_name2 = "hertz",
_symbol = "Hz",
utype = "length",
scale = 3.3356409519815204e-9,
invert = -1,
iscomplex= true,
prefixes = 1,
default = "m",
link = "Hertz",
},
["rpm"] = {
name1 = "revolution per minute",
name2 = "revolutions per minute",
symbol = "rpm",
utype = "length",
scale = 5.5594015866358675e-11,
invert = -1,
iscomplex= true,
default = "Hz",
link = "Revolutions per minute",
},
["-ft-frac"] = {
target = "ft",
link = "Fracture gradient",
},
["-in-stiff"] = {
target = "in",
link = "Stiffness",
},
["-m-frac"] = {
target = "m",
link = "Fracture gradient",
},
["-m-stiff"] = {
target = "m",
link = "Stiffness",
},
["100km"] = {
target = "km",
multiplier= 100,
},
["100mi"] = {
target = "mi",
multiplier= 100,
},
["100miles"] = {
target = "mi",
symbol = "miles",
multiplier= 100,
},
["admiralty nmi"] = {
target = "oldUKnmi",
},
["angstrom"] = {
target = "Å",
},
["au"] = {
target = "AU",
symbol = "au",
},
["feet"] = {
target = "ft",
},
["hands"] = {
target = "hand",
},
["inch"] = {
target = "in",
},
["light-year"] = {
target = "ly",
},
["meter"] = {
target = "m",
sp_us = true,
},
["meters"] = {
target = "m",
sp_us = true,
},
["metre"] = {
target = "m",
},
["metres"] = {
target = "m",
},
["micrometre"] = {
target = "μm",
},
["micron"] = {
target = "μm",
default = "μin",
},
["mile"] = {
target = "mi",
},
["miles"] = {
target = "mi",
},
["parsec"] = {
target = "pc",
},
["rod"] = {
target = "rd",
},
["smoot"] = {
target = "sm",
},
["uin"] = {
target = "μin",
},
["yard"] = {
target = "yd",
},
["yards"] = {
target = "yd",
},
["yds"] = {
target = "yd",
},
["dtex"] = {
name1 = "decitex",
name2 = "decitex",
symbol = "dtex",
utype = "linear density",
scale = 1e-7,
default = "lb/yd",
link = "Units of textile measurement#Units",
},
["kg/cm"] = {
name1 = "kilogram per centimetre",
name1_us = "kilogram per centimeter",
name2 = "kilograms per centimetre",
name2_us = "kilograms per centimeter",
symbol = "kg/cm",
utype = "linear density",
scale = 100,
default = "lb/yd",
link = "Linear density",
},
["kg/m"] = {
name1 = "kilogram per metre",
name1_us = "kilogram per meter",
name2 = "kilograms per metre",
name2_us = "kilograms per meter",
symbol = "kg/m",
utype = "linear density",
scale = 1,
default = "lb/yd",
link = "Linear density",
},
["lb/ft"] = {
name1 = "pound per foot",
name2 = "pounds per foot",
symbol = "lb/ft",
utype = "linear density",
scale = 1.4881639435695539,
default = "kg/m",
link = "Linear density",
},
["lb/yd"] = {
name1 = "pound per yard",
name2 = "pounds per yard",
symbol = "lb/yd",
utype = "linear density",
scale = 0.49605464785651798,
default = "kg/m",
link = "Linear density",
},
["G"] = {
_name1 = "gauss",
_name2 = "gauss",
_symbol = "G",
utype = "magnetic field strength",
scale = 0.0001,
prefixes = 1,
default = "T",
link = "Gauss (unit)",
},
["T"] = {
_name1 = "tesla",
_symbol = "T",
utype = "magnetic field strength",
scale = 1,
prefixes = 1,
default = "G",
link = "Tesla (unit)",
},
["A/m"] = {
name1 = "ampere per metre",
name1_us = "ampere per meter",
name2 = "amperes per metre",
name2_us = "amperes per meter",
symbol = "A/m",
utype = "magnetizing field",
scale = 1,
default = "Oe",
},
["kA/m"] = {
name1 = "kiloampere per metre",
name1_us = "kiloampere per meter",
name2 = "kiloamperes per metre",
name2_us = "kiloamperes per meter",
symbol = "kA/m",
utype = "magnetizing field",
scale = 1000,
default = "kOe",
link = "Ampere per metre",
},
["MA/m"] = {
name1 = "megaampere per metre",
name1_us = "megaampere per meter",
name2 = "megaamperes per metre",
name2_us = "megaamperes per meter",
symbol = "MA/m",
utype = "magnetizing field",
scale = 1e6,
default = "kOe",
link = "Ampere per metre",
},
["Oe"] = {
_name1 = "oersted",
_symbol = "Oe",
utype = "magnetizing field",
scale = 79.5774715,
prefixes = 1,
default = "kA/m",
link = "Oersted",
},
["-Lcwt"] = {
name1 = "hundredweight",
name2 = "hundredweight",
symbol = "cwt",
utype = "mass",
scale = 50.80234544,
default = "lb",
},
["-Scwt"] = {
name1 = "hundredweight",
name2 = "hundredweight",
symbol = "cwt",
utype = "mass",
scale = 45.359237,
default = "lb",
},
["-ST"] = {
name1 = "short ton",
symbol = "ST",
utype = "mass",
scale = 907.18474,
default = "t",
},
["carat"] = {
symbol = "carat",
usename = 1,
utype = "mass",
scale = 0.0002,
default = "g",
link = "Carat (mass)",
},
["drachm"] = {
name1_us = "dram",
symbol = "drachm",
usename = 1,
utype = "mass",
scale = 0.001771845195,
default = "g",
link = "Dram (unit)",
},
["dram"] = {
target = "drachm",
},
["dwt"] = {
name1 = "pennyweight",
symbol = "dwt",
utype = "mass",
scale = 0.00155517384,
default = "oz g",
},
["DWton"] = {
symbol = "deadweight ton",
usename = 1,
utype = "mass",
scale = 1016.0469088,
default = "DWtonne",
link = "Tonnage",
},
["DWtonne"] = {
symbol = "deadweight tonne",
usename = 1,
utype = "mass",
scale = 1000,
default = "DWton",
link = "Tonnage",
},
["g"] = {
_name1 = "gram",
_symbol = "g",
utype = "mass",
scale = 0.001,
prefixes = 1,
default = "oz",
link = "Gram",
},
["gr"] = {
name1 = "grain",
symbol = "gr",
utype = "mass",
scale = 0.00006479891,
default = "g",
link = "Grain (unit)",
},
["Gt"] = {
name1 = "gigatonne",
symbol = "Gt",
utype = "mass",
scale = 1000000000000,
default = "LT ST",
link = "Tonne",
},
["impgalh2o"] = {
name1 = "imperial gallon of water",
name2 = "imperial gallons of water",
symbol = "imp gal H<sub>2</sub>O",
utype = "mass",
scale = 4.5359236999999499,
default = "lb kg",
link = "Imperial gallon",
},
["kt"] = {
name1 = "kilotonne",
symbol = "kt",
utype = "mass",
scale = 1000000,
default = "LT ST",
link = "Tonne",
},
["lb"] = {
name1 = "pound",
symbol = "lb",
utype = "mass",
scale = 0.45359237,
exception= "integer_more_precision",
default = "kg",
subdivs = { ["oz"] = { 16, default = "kg" } },
link = "Pound (mass)",
},
["Lcwt"] = {
name1 = "long hundredweight",
name2 = "long hundredweight",
symbol = "Lcwt",
usename = 1,
utype = "mass",
scale = 50.80234544,
default = "lb",
subdivs = { ["qtr"] = { 4, default = "kg" }, ["st"] = { 8, default = "kg" } },
link = "Hundredweight",
},
["long cwt"] = {
name1 = "long hundredweight",
name2 = "long hundredweight",
symbol = "long cwt",
utype = "mass",
scale = 50.80234544,
default = "lb kg",
subdivs = { ["qtr"] = { 4, default = "kg" } },
link = "Hundredweight",
},
["long qtr"] = {
name1 = "long quarter",
symbol = "long qtr",
utype = "mass",
scale = 12.70058636,
default = "lb kg",
},
["LT"] = {
symbol = "long ton",
usename = 1,
utype = "mass",
scale = 1016.0469088,
default = "t",
subdivs = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },
},
["lt"] = {
name1 = "long ton",
symbol = "LT",
utype = "mass",
scale = 1016.0469088,
default = "t",
subdivs = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },
},
["metric ton"] = {
symbol = "metric ton",
usename = 1,
utype = "mass",
scale = 1000,
default = "long ton",
link = "Tonne",
},
["MT"] = {
name1 = "metric ton",
symbol = "t",
utype = "mass",
scale = 1000,
default = "LT ST",
link = "Tonne",
},
["Mt"] = {
name1 = "megatonne",
symbol = "Mt",
utype = "mass",
scale = 1000000000,
default = "LT ST",
link = "Tonne",
},
["oz"] = {
name1 = "ounce",
symbol = "oz",
utype = "mass",
scale = 0.028349523125,
default = "g",
},
["ozt"] = {
name1 = "troy ounce",
symbol = "ozt",
utype = "mass",
scale = 0.0311034768,
default = "oz g",
},
["pdr"] = {
name1 = "pounder",
symbol = "pdr",
utype = "mass",
scale = 0.45359237,
default = "kg",
link = "Pound (mass)",
},
["qtr"] = {
name1 = "quarter",
symbol = "qtr",
utype = "mass",
scale = 12.70058636,
default = "lb kg",
subdivs = { ["lb"] = { 28, default = "kg" } },
link = "Long quarter",
},
["Scwt"] = {
name1 = "short hundredweight",
name2 = "short hundredweight",
symbol = "Scwt",
usename = 1,
utype = "mass",
scale = 45.359237,
default = "lb",
link = "Hundredweight",
},
["short cwt"] = {
name1 = "short hundredweight",
name2 = "short hundredweight",
symbol = "short cwt",
utype = "mass",
scale = 45.359237,
default = "lb kg",
link = "Hundredweight",
},
["short qtr"] = {
name1 = "short quarter",
symbol = "short qtr",
utype = "mass",
scale = 11.33980925,
default = "lb kg",
},
["ST"] = {
symbol = "short ton",
usename = 1,
utype = "mass",
scale = 907.18474,
default = "t",
subdivs = { ["Scwt"] = { 20, default = "t", unit = "-Scwt" } },
},
["shtn"] = {
name1 = "short ton",
symbol = "sh tn",
utype = "mass",
scale = 907.18474,
default = "t",
},
["shton"] = {
symbol = "ton",
usename = 1,
utype = "mass",
scale = 907.18474,
default = "t",
},
["solar mass"] = {
name1 = "solar mass",
name2 = "solar masses",
symbol = "''M''<sub>☉</sub>",
utype = "mass",
scale = 1.98855e30,
default = "kg",
},
["st"] = {
name1 = "stone",
name2 = "stone",
symbol = "st",
utype = "mass",
scale = 6.35029318,
default = "lb kg",
subdivs = { ["lb"] = { 14, default = "kg lb" } },
link = "Stone (unit)",
},
["t"] = {
name1 = "tonne",
name1_us = "metric ton",
symbol = "t",
utype = "mass",
scale = 1000,
default = "LT ST",
},
["tonne"] = {
name1 = "tonne",
name1_us = "metric ton",
symbol = "t",
utype = "mass",
scale = 1000,
default = "shton",
},
["troy pound"] = {
symbol = "troy pound",
usename = 1,
utype = "mass",
scale = 0.3732417216,
default = "lb kg",
link = "Troy weight",
},
["usgalh2o"] = {
name1 = "US gallon of water",
name1_us = "U.S. gallon of water",
name2 = "US gallons of water",
name2_us = "U.S. gallons of water",
symbol = "US gal H<sub>2</sub>O",
utype = "mass",
scale = 3.7776215836051126,
default = "lb kg",
link = "United States customary units#Fluid volume",
},
["viss"] = {
name2 = "viss",
symbol = "viss",
utype = "mass",
scale = 1.632932532,
default = "kg",
link = "Myanmar units of measurement#Mass",
},
["billion tonne"] = {
target = "e9t",
},
["kilogram"] = {
target = "kg",
},
["kilotonne"] = {
target = "kt",
},
["lbs"] = {
target = "lb",
},
["lbt"] = {
target = "troy pound",
},
["lcwt"] = {
target = "Lcwt",
},
["long ton"] = {
target = "LT",
},
["mcg"] = {
target = "μg",
},
["million tonne"] = {
target = "e6t",
},
["scwt"] = {
target = "Scwt",
},
["short ton"] = {
target = "ST",
},
["stone"] = {
target = "st",
},
["thousand tonne"] = {
target = "e3t",
},
["tonnes"] = {
target = "t",
},
["kg/kW"] = {
name1 = "kilogram per kilowatt",
name2 = "kilograms per kilowatt",
symbol = "kg/kW",
utype = "mass per unit power",
scale = 0.001,
default = "lb/hp",
link = "Kilowatt",
},
["lb/hp"] = {
name1 = "pound per horsepower",
name2 = "pounds per horsepower",
symbol = "lb/hp",
utype = "mass per unit power",
scale = 0.00060827738784176115,
default = "kg/kW",
link = "Horsepower",
},
["kg/h"] = {
per = { "kg", "h" },
utype = "mass per unit time",
default = "lb/h",
},
["lb/h"] = {
per = { "lb", "h" },
utype = "mass per unit time",
default = "kg/h",
},
["g-mol/d"] = {
name1 = "gram-mole per day",
name2 = "gram-moles per day",
symbol = "g‑mol/d",
utype = "molar rate",
scale = 1.1574074074074073e-5,
default = "μmol/s",
link = "Mole (unit)",
},
["g-mol/h"] = {
name1 = "gram-mole per hour",
name2 = "gram-moles per hour",
symbol = "g‑mol/h",
utype = "molar rate",
scale = 0.00027777777777777778,
default = "mmol/s",
link = "Mole (unit)",
},
["g-mol/min"] = {
name1 = "gram-mole per minute",
name2 = "gram-moles per minute",
symbol = "g‑mol/min",
utype = "molar rate",
scale = 0.016666666666666666,
default = "g-mol/s",
link = "Mole (unit)",
},
["g-mol/s"] = {
name1 = "gram-mole per second",
name2 = "gram-moles per second",
symbol = "g‑mol/s",
utype = "molar rate",
scale = 1,
default = "lb-mol/min",
link = "Mole (unit)",
},
["gmol/d"] = {
name1 = "gram-mole per day",
name2 = "gram-moles per day",
symbol = "gmol/d",
utype = "molar rate",
scale = 1.1574074074074073e-5,
default = "μmol/s",
link = "Mole (unit)",
},
["gmol/h"] = {
name1 = "gram-mole per hour",
name2 = "gram-moles per hour",
symbol = "gmol/h",
utype = "molar rate",
scale = 0.00027777777777777778,
default = "mmol/s",
link = "Mole (unit)",
},
["gmol/min"] = {
name1 = "gram-mole per minute",
name2 = "gram-moles per minute",
symbol = "gmol/min",
utype = "molar rate",
scale = 0.016666666666666666,
default = "gmol/s",
link = "Mole (unit)",
},
["gmol/s"] = {
name1 = "gram-mole per second",
name2 = "gram-moles per second",
symbol = "gmol/s",
utype = "molar rate",
scale = 1,
default = "lbmol/min",
link = "Mole (unit)",
},
["kmol/d"] = {
name1 = "kilomole per day",
name2 = "kilomoles per day",
symbol = "kmol/d",
utype = "molar rate",
scale = 0.011574074074074073,
default = "mmol/s",
link = "Mole (unit)",
},
["kmol/h"] = {
name1 = "kilomole per hour",
name2 = "kilomoles per hour",
symbol = "kmol/h",
utype = "molar rate",
scale = 0.27777777777777779,
default = "mol/s",
link = "Mole (unit)",
},
["kmol/min"] = {
name1 = "kilomole per minute",
name2 = "kilomoles per minute",
symbol = "kmol/min",
utype = "molar rate",
scale = 16.666666666666668,
default = "mol/s",
link = "Kilomole (unit)",
},
["kmol/s"] = {
name1 = "kilomole per second",
name2 = "kilomoles per second",
symbol = "kmol/s",
utype = "molar rate",
scale = 1000,
default = "lb-mol/s",
link = "Mole (unit)",
},
["lb-mol/d"] = {
name1 = "pound-mole per day",
name2 = "pound-moles per day",
symbol = "lb‑mol/d",
utype = "molar rate",
scale = 0.0052499116898148141,
default = "mmol/s",
link = "Pound-mole",
},
["lb-mol/h"] = {
name1 = "pound-mole per hour",
name2 = "pound-moles per hour",
symbol = "lb‑mol/h",
utype = "molar rate",
scale = 0.12599788055555555,
default = "mol/s",
link = "Pound-mole",
},
["lb-mol/min"] = {
name1 = "pound-mole per minute",
name2 = "pound-moles per minute",
symbol = "lb‑mol/min",
utype = "molar rate",
scale = 7.5598728333333334,
default = "mol/s",
link = "Pound-mole",
},
["lb-mol/s"] = {
name1 = "pound-mole per second",
name2 = "pound-moles per second",
symbol = "lb‑mol/s",
utype = "molar rate",
scale = 453.59237,
default = "kmol/s",
link = "Pound-mole",
},
["lbmol/d"] = {
name1 = "pound-mole per day",
name2 = "pound-moles per day",
symbol = "lbmol/d",
utype = "molar rate",
scale = 0.0052499116898148141,
default = "mmol/s",
link = "Pound-mole",
},
["lbmol/h"] = {
name1 = "pound-mole per hour",
name2 = "pound-moles per hour",
symbol = "lbmol/h",
utype = "molar rate",
scale = 0.12599788055555555,
default = "mol/s",
link = "Pound-mole",
},
["lbmol/min"] = {
name1 = "pound-mole per minute",
name2 = "pound-moles per minute",
symbol = "lbmol/min",
utype = "molar rate",
scale = 7.5598728333333334,
default = "mol/s",
link = "Pound-mole",
},
["lbmol/s"] = {
name1 = "pound-mole per second",
name2 = "pound-moles per second",
symbol = "lbmol/s",
utype = "molar rate",
scale = 453.59237,
default = "kmol/s",
link = "Pound-mole",
},
["mmol/s"] = {
name1 = "millimole per second",
name2 = "millimoles per second",
symbol = "mmol/s",
utype = "molar rate",
scale = 0.001,
default = "lb-mol/d",
link = "Mole (unit)",
},
["mol/d"] = {
name1 = "mole per day",
name2 = "moles per day",
symbol = "mol/d",
utype = "molar rate",
scale = 1.1574074074074073e-5,
default = "μmol/s",
link = "Mole (unit)",
},
["mol/h"] = {
name1 = "mole per hour",
name2 = "moles per hour",
symbol = "mol/h",
utype = "molar rate",
scale = 0.00027777777777777778,
default = "mmol/s",
link = "Mole (unit)",
},
["mol/min"] = {
name1 = "mole per minute",
name2 = "moles per minute",
symbol = "mol/min",
utype = "molar rate",
scale = 0.016666666666666666,
default = "mol/s",
link = "Mole (unit)",
},
["mol/s"] = {
name1 = "mole per second",
name2 = "moles per second",
symbol = "mol/s",
utype = "molar rate",
scale = 1,
default = "lb-mol/min",
link = "Mole (unit)",
},
["μmol/s"] = {
name1 = "micromole per second",
name2 = "micromoles per second",
symbol = "μmol/s",
utype = "molar rate",
scale = 0.000001,
default = "lb-mol/d",
link = "Mole (unit)",
},
["umol/s"] = {
target = "μmol/s",
},
["/acre"] = {
name1 = "per acre",
name2 = "per acre",
symbol = "/acre",
utype = "per unit area",
scale = 0.00024710538146716532,
default = "/ha",
link = "Acre",
},
["/ha"] = {
name1 = "per hectare",
name2 = "per hectare",
symbol = "/ha",
utype = "per unit area",
scale = 100e-6,
default = "/acre",
link = "Hectare",
},
["/sqcm"] = {
name1 = "per square centimetre",
name1_us = "per square centimeter",
name2 = "per square centimetre",
name2_us = "per square centimeter",
symbol = "/cm<sup>2</sup>",
utype = "per unit area",
scale = 1e4,
default = "/sqin",
link = "Square centimetre",
},
["/sqin"] = {
name1 = "per square inch",
name2 = "per square inch",
symbol = "/in<sup>2</sup>",
utype = "per unit area",
scale = 1550.0031000062002,
default = "/sqcm",
link = "Square inch",
},
["/sqkm"] = {
name1 = "per square kilometre",
name1_us = "per square kilometer",
name2 = "per square kilometre",
name2_us = "per square kilometer",
symbol = "/km<sup>2</sup>",
utype = "per unit area",
scale = 1e-6,
default = "/sqmi",
link = "Square kilometre",
},
["/sqmi"] = {
name1 = "per square mile",
name2 = "per square mile",
symbol = "/sq mi",
utype = "per unit area",
scale = 3.8610215854244582e-7,
default = "/sqkm",
link = "Square mile",
},
["PD/acre"] = {
name1 = "inhabitant per acre",
name2 = "inhabitants per acre",
symbol = "/acre",
utype = "per unit area",
scale = 0.00024710538146716532,
default = "PD/ha",
link = "Acre",
},
["PD/ha"] = {
name1 = "inhabitant per hectare",
name2 = "inhabitants per hectare",
symbol = "/ha",
utype = "per unit area",
scale = 100e-6,
default = "PD/acre",
link = "Hectare",
},
["PD/sqkm"] = {
name1 = "inhabitant per square kilometre",
name1_us = "inhabitant per square kilometer",
name2 = "inhabitants per square kilometre",
name2_us = "inhabitants per square kilometer",
symbol = "/km<sup>2</sup>",
utype = "per unit area",
scale = 1e-6,
default = "PD/sqmi",
link = "Square kilometre",
},
["PD/sqmi"] = {
name1 = "inhabitant per square mile",
name2 = "inhabitants per square mile",
symbol = "/sq mi",
utype = "per unit area",
scale = 3.8610215854244582e-7,
default = "PD/sqkm",
link = "Square mile",
},
["/cm2"] = {
target = "/sqcm",
},
["/in2"] = {
target = "/sqin",
},
["/km2"] = {
target = "/sqkm",
},
["pd/acre"] = {
target = "PD/acre",
},
["pd/ha"] = {
target = "PD/ha",
},
["PD/km2"] = {
target = "PD/sqkm",
},
["pd/km2"] = {
target = "PD/sqkm",
},
["PD/km²"] = {
target = "PD/sqkm",
},
["pd/sqkm"] = {
target = "PD/sqkm",
},
["pd/sqmi"] = {
target = "PD/sqmi",
},
["/l"] = {
name1 = "per litre",
name1_us = "per liter",
name2 = "per litre",
name2_us = "per liter",
symbol = "/l",
utype = "per unit volume",
scale = 1000,
default = "/usgal",
link = "Litre",
},
["/USgal"] = {
name1 = "per gallon",
name2 = "per gallon",
symbol = "/gal",
utype = "per unit volume",
scale = 264.172052,
default = "/l",
link = "US gallon",
customary= 2,
},
["/usgal"] = {
target = "/USgal",
},
["bhp"] = {
name1 = "brake horsepower",
name2 = "brake horsepower",
symbol = "bhp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
link = "Horsepower#Brake horsepower",
},
["Cal/d"] = {
name1 = "large calorie per day",
name2 = "large calories per day",
symbol = "Cal/d",
utype = "power",
scale = 0.048425925925925928,
default = "kJ/d",
link = "Calorie",
},
["Cal/h"] = {
name1 = "large calorie per hour",
name2 = "large calories per hour",
symbol = "Cal/h",
utype = "power",
scale = 1.1622222222222223,
default = "kJ/h",
link = "Calorie",
},
["cal/h"] = {
name1 = "calorie per hour",
name2 = "calories per hour",
symbol = "cal/h",
utype = "power",
scale = 0.0011622222222222223,
default = "W",
link = "Calorie",
},
["CV"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "CV",
utype = "power",
scale = 735.49875,
default = "kW",
},
["hk"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "hk",
utype = "power",
scale = 735.49875,
default = "kW",
},
["hp"] = {
name1 = "horsepower",
name2 = "horsepower",
symbol = "hp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
},
["hp-electric"] = {
name1 = "electric horsepower",
name2 = "electric horsepower",
symbol = "hp",
utype = "power",
scale = 746,
default = "kW",
link = "Horsepower#Electrical horsepower",
},
["hp-electrical"] = {
name1 = "electrical horsepower",
name2 = "electrical horsepower",
symbol = "hp",
utype = "power",
scale = 746,
default = "kW",
link = "Horsepower#Electrical horsepower",
},
["hp-metric"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "hp",
utype = "power",
scale = 735.49875,
default = "kW",
},
["ihp"] = {
name1 = "indicated horsepower",
name2 = "indicated horsepower",
symbol = "ihp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
link = "Horsepower#Indicated horsepower",
},
["kcal/h"] = {
name1 = "kilocalorie per hour",
name2 = "kilocalories per hour",
symbol = "kcal/h",
utype = "power",
scale = 1.1622222222222223,
default = "kW",
link = "Calorie",
},
["kJ/d"] = {
name1 = "kilojoule per day",
name2 = "kilojoules per day",
symbol = "kJ/d",
utype = "power",
scale = 0.011574074074074073,
default = "Cal/d",
link = "Kilojoule",
},
["kJ/h"] = {
name1 = "kilojoule per hour",
name2 = "kilojoules per hour",
symbol = "kJ/h",
utype = "power",
scale = 0.27777777777777779,
default = "W",
link = "Kilojoule",
},
["PS"] = {
name1 = "metric horsepower",
name2 = "metric horsepower",
symbol = "PS",
utype = "power",
scale = 735.49875,
default = "kW",
},
["shp"] = {
name1 = "shaft horsepower",
name2 = "shaft horsepower",
symbol = "shp",
utype = "power",
scale = 745.69987158227022,
default = "kW",
link = "Horsepower#Shaft horsepower",
},
["W"] = {
_name1 = "watt",
_symbol = "W",
utype = "power",
scale = 1,
prefixes = 1,
default = "hp",
link = "Watt",
},
["BTU/h"] = {
per = { "BTU", "h" },
utype = "power",
default = "W",
},
["Btu/h"] = {
per = { "Btu", "h" },
utype = "power",
default = "W",
},
["BHP"] = {
target = "bhp",
},
["btu/h"] = {
target = "BTU/h",
},
["HP"] = {
target = "hp",
},
["Hp"] = {
target = "hp",
},
["hp-mechanical"] = {
target = "hp",
},
["IHP"] = {
target = "ihp",
},
["SHP"] = {
target = "shp",
},
["whp"] = {
target = "hp",
},
["hp/lb"] = {
name1 = "horsepower per pound",
name2 = "horsepower per pound",
symbol = "hp/lb",
utype = "power per unit mass",
scale = 1643.986806,
default = "kW/kg",
link = "Power-to-weight ratio",
},
["hp/LT"] = {
name1 = "horsepower per long ton",
name2 = "horsepower per long ton",
symbol = "hp/LT",
utype = "power per unit mass",
scale = 0.73392268125000004,
default = "kW/t",
link = "Power-to-weight ratio",
},
["hp/ST"] = {
name1 = "horsepower per short ton",
name2 = "horsepower per short ton",
symbol = "hp/ST",
utype = "power per unit mass",
scale = 0.821993403,
default = "kW/t",
link = "Power-to-weight ratio",
},
["hp/t"] = {
name1 = "horsepower per tonne",
name2 = "horsepower per tonne",
symbol = "hp/t",
utype = "power per unit mass",
scale = 0.74569987158227022,
default = "kW/t",
link = "Power-to-weight ratio",
},
["kW/kg"] = {
name1 = "kilowatt per kilogram",
name2 = "kilowatts per kilogram",
symbol = "kW/kg",
utype = "power per unit mass",
scale = 1000,
default = "hp/lb",
link = "Power-to-weight ratio",
},
["kW/t"] = {
name1 = "kilowatt per tonne",
name2 = "kilowatts per tonne",
symbol = "kW/t",
utype = "power per unit mass",
scale = 1,
default = "PS/t",
link = "Power-to-weight ratio",
},
["PS/t"] = {
name1 = "metric horsepower per tonne",
name2 = "metric horsepower per tonne",
symbol = "PS/t",
utype = "power per unit mass",
scale = 0.73549875,
default = "kW/t",
link = "Power-to-weight ratio",
},
["shp/lb"] = {
name1 = "shaft horsepower per pound",
name2 = "shaft horsepower per pound",
symbol = "shp/lb",
utype = "power per unit mass",
scale = 1643.986806,
default = "kW/kg",
link = "Power-to-weight ratio",
},
["hp/tonne"] = {
target = "hp/t",
symbol = "hp/tonne",
default = "kW/tonne",
},
["kW/tonne"] = {
target = "kW/t",
symbol = "kW/tonne",
},
["-lb/in2"] = {
name1 = "pound per square inch",
name2 = "pounds per square inch",
symbol = "lb/in<sup>2</sup>",
utype = "pressure",
scale = 6894.7572931683608,
default = "kPa kgf/cm2",
},
["atm"] = {
name1 = "standard atmosphere",
symbol = "atm",
utype = "pressure",
scale = 101325,
default = "kPa",
link = "Atmosphere (unit)",
},
["Ba"] = {
name1 = "barye",
symbol = "Ba",
utype = "pressure",
scale = 0.1,
default = "Pa",
},
["bar"] = {
symbol = "bar",
utype = "pressure",
scale = 100000,
default = "kPa",
link = "Bar (unit)",
},
["dbar"] = {
name1 = "decibar",
symbol = "dbar",
utype = "pressure",
scale = 10000,
default = "kPa",
link = "Bar (unit)",
},
["inHg"] = {
name1 = "inch of mercury",
name2 = "inches of mercury",
symbol = "inHg",
utype = "pressure",
scale = 3386.388640341,
default = "kPa",
},
["kBa"] = {
name1 = "kilobarye",
symbol = "kBa",
utype = "pressure",
scale = 100,
default = "hPa",
link = "Barye",
},
["kg-f/cm2"] = {
name1 = "kilogram-force per square centimetre",
name1_us = "kilogram-force per square centimeter",
name2 = "kilograms-force per square centimetre",
name2_us = "kilograms-force per square centimeter",
symbol = "kg<sub>f</sub>/cm<sup>2</sup>",
utype = "pressure",
scale = 98066.5,
default = "psi",
link = "Kilogram-force",
},
["kg/cm2"] = {
name1 = "kilogram per square centimetre",
name1_us = "kilogram per square centimeter",
name2 = "kilograms per square centimetre",
name2_us = "kilograms per square centimeter",
symbol = "kg/cm<sup>2</sup>",
utype = "pressure",
scale = 98066.5,
default = "psi",
link = "Kilogram-force",
},
["kgf/cm2"] = {
name1 = "kilogram-force per square centimetre",
name1_us = "kilogram-force per square centimeter",
name2 = "kilograms-force per square centimetre",
name2_us = "kilograms-force per square centimeter",
symbol = "kgf/cm<sup>2</sup>",
utype = "pressure",
scale = 98066.5,
default = "psi",
link = "Kilogram-force",
},
["ksi"] = {
name1 = "kilopound per square inch",
name2 = "kilopounds per square inch",
symbol = "ksi",
utype = "pressure",
scale = 6894757.2931683613,
default = "MPa",
link = "Pound per square inch",
},
["lbf/in2"] = {
name1 = "pound-force per square inch",
name2 = "pounds-force per square inch",
symbol = "lbf/in<sup>2</sup>",
utype = "pressure",
scale = 6894.7572931683608,
default = "kPa kgf/cm2",
},
["mb"] = {
name1 = "millibar",
symbol = "mb",
utype = "pressure",
scale = 100,
default = "hPa",
link = "Bar (unit)",
},
["mbar"] = {
name1 = "millibar",
symbol = "mbar",
utype = "pressure",
scale = 100,
default = "hPa",
link = "Bar (unit)",
},
["mmHg"] = {
name1 = "millimetre of mercury",
name1_us = "millimeter of mercury",
name2 = "millimetres of mercury",
name2_us = "millimeters of mercury",
symbol = "mmHg",
utype = "pressure",
scale = 133.322387415,
default = "kPa",
},
["Pa"] = {
_name1 = "pascal",
_symbol = "Pa",
utype = "pressure",
scale = 1,
prefixes = 1,
default = "psi",
link = "Pascal (unit)",
},
["psf"] = {
name1 = "pound per square foot",
name2 = "pounds per square foot",
symbol = "psf",
utype = "pressure",
scale = 47.880258980335839,
default = "kPa",
link = "Pound per square inch",
},
["psi"] = {
name1 = "pound per square inch",
name2 = "pounds per square inch",
symbol = "psi",
utype = "pressure",
scale = 6894.7572931683608,
default = "kPa",
},
["Torr"] = {
name1 = "torr",
symbol = "Torr",
utype = "pressure",
scale = 133.32236842105263,
default = "kPa",
},
["N/cm2"] = {
per = { "N", "cm2" },
utype = "pressure",
default = "psi",
},
["N/m2"] = {
per = { "N", "m2" },
utype = "pressure",
default = "psi",
},
["g/cm2"] = {
per = { "g", "cm2" },
utype = "pressure",
default = "lb/sqft",
multiplier= 9.80665,
},
["g/m2"] = {
per = { "g", "m2" },
utype = "pressure",
default = "lb/sqft",
multiplier= 9.80665,
},
["kg/ha"] = {
per = { "kg", "ha" },
utype = "pressure",
default = "lb/acre",
multiplier= 9.80665,
},
["kg/m2"] = {
per = { "kg", "m2" },
utype = "pressure",
default = "lb/sqft",
multiplier= 9.80665,
},
["lb/1000sqft"] = {
per = { "lb", "1000sqft" },
utype = "pressure",
default = "g/m2",
multiplier= 9.80665,
},
["lb/acre"] = {
per = { "lb", "acre" },
utype = "pressure",
default = "kg/ha",
multiplier= 9.80665,
},
["lb/sqft"] = {
per = { "lb", "sqft" },
utype = "pressure",
default = "kg/m2",
multiplier= 9.80665,
},
["lb/sqyd"] = {
per = { "lb", "sqyd" },
utype = "pressure",
default = "kg/m2",
multiplier= 9.80665,
},
["LT/acre"] = {
per = { "LT", "acre" },
utype = "pressure",
default = "t/ha",
multiplier= 9.80665,
},
["MT/ha"] = {
per = { "MT", "ha" },
utype = "pressure",
default = "LT/acre ST/acre",
multiplier= 9.80665,
},
["oz/sqft"] = {
per = { "oz", "sqft" },
utype = "pressure",
default = "g/m2",
multiplier= 9.80665,
},
["oz/sqyd"] = {
per = { "oz", "sqyd" },
utype = "pressure",
default = "g/m2",
multiplier= 9.80665,
},
["ST/acre"] = {
per = { "ST", "acre" },
utype = "pressure",
default = "t/ha",
multiplier= 9.80665,
},
["t/ha"] = {
per = { "t", "ha" },
utype = "pressure",
default = "LT/acre ST/acre",
multiplier= 9.80665,
},
["tonne/acre"] = {
per = { "tonne", "acre" },
utype = "pressure",
default = "tonne/ha",
multiplier= 9.80665,
},
["tonne/ha"] = {
per = { "tonne", "ha" },
utype = "pressure",
default = "tonne/acre",
multiplier= 9.80665,
},
["kgfpsqcm"] = {
target = "kgf/cm2",
},
["kgpsqcm"] = {
target = "kg/cm2",
},
["kN/m2"] = {
target = "kPa",
},
["lb/in2"] = {
target = "lbf/in2",
},
["torr"] = {
target = "Torr",
},
["Bq"] = {
_name1 = "becquerel",
_symbol = "Bq",
utype = "radioactivity",
scale = 1,
prefixes = 1,
default = "pCi",
link = "Becquerel",
},
["Ci"] = {
_name1 = "curie",
_symbol = "Ci",
utype = "radioactivity",
scale = 3.7e10,
prefixes = 1,
default = "GBq",
link = "Curie (unit)",
},
["Rd"] = {
_name1 = "rutherford",
_symbol = "Rd",
utype = "radioactivity",
scale = 1e6,
prefixes = 1,
default = "MBq",
link = "Rutherford (unit)",
},
["cm/h"] = {
name1 = "centimetre per hour",
name1_us = "centimeter per hour",
name2 = "centimetres per hour",
name2_us = "centimeters per hour",
symbol = "cm/h",
utype = "speed",
scale = 2.7777777777777775e-6,
default = "in/h",
link = "Metre per second",
},
["cm/s"] = {
name1 = "centimetre per second",
name1_us = "centimeter per second",
name2 = "centimetres per second",
name2_us = "centimeters per second",
symbol = "cm/s",
utype = "speed",
scale = 0.01,
default = "in/s",
link = "Metre per second",
},
["cm/year"] = {
name1 = "centimetre per year",
name1_us = "centimeter per year",
name2 = "centimetres per year",
name2_us = "centimeters per year",
symbol = "cm/year",
utype = "speed",
scale = 3.168873850681143e-10,
default = "in/year",
link = "Orders of magnitude (speed)",
},
["foot/s"] = {
name1 = "foot per second",
name2 = "foot per second",
symbol = "ft/s",
utype = "speed",
scale = 0.3048,
default = "m/s",
},
["ft/min"] = {
name1 = "foot per minute",
name2 = "feet per minute",
symbol = "ft/min",
utype = "speed",
scale = 0.00508,
default = "m/min",
link = "Feet per second",
},
["ft/s"] = {
name1 = "foot per second",
name2 = "feet per second",
symbol = "ft/s",
utype = "speed",
scale = 0.3048,
default = "m/s",
link = "Feet per second",
},
["furlong per fortnight"] = {
name2 = "furlongs per fortnight",
symbol = "furlong per fortnight",
usename = 1,
utype = "speed",
scale = 0.00016630952380952381,
default = "km/h mph",
link = "FFF system",
},
["in/h"] = {
name1 = "inch per hour",
name2 = "inches per hour",
symbol = "in/h",
utype = "speed",
scale = 7.0555555555555559e-6,
default = "cm/h",
link = "Inch",
},
["in/s"] = {
name1 = "inch per second",
name2 = "inches per second",
symbol = "in/s",
utype = "speed",
scale = 0.0254,
default = "cm/s",
link = "Inch",
},
["in/year"] = {
name1 = "inch per year",
name2 = "inches per year",
symbol = "in/year",
utype = "speed",
scale = 8.0489395807301024e-10,
default = "cm/year",
link = "Orders of magnitude (speed)",
},
["isp"] = {
name1 = "second",
symbol = "s",
utype = "speed",
scale = 9.80665,
default = "km/s",
link = "Specific impulse",
},
["km/d"] = {
name1 = "kilometre per day",
name1_us = "kilometer per day",
name2 = "kilometres per day",
name2_us = "kilometers per day",
symbol = "km/d",
utype = "speed",
scale = 1.1574074074074074e-2,
default = "mi/d",
link = "Orders of magnitude (speed)",
},
["km/h"] = {
name1 = "kilometre per hour",
name1_us = "kilometer per hour",
name2 = "kilometres per hour",
name2_us = "kilometers per hour",
symbol = "km/h",
utype = "speed",
scale = 0.27777777777777779,
default = "mph",
link = "Kilometres per hour",
},
["km/s"] = {
name1 = "kilometre per second",
name1_us = "kilometer per second",
name2 = "kilometres per second",
name2_us = "kilometers per second",
symbol = "km/s",
utype = "speed",
scale = 1000,
default = "mi/s",
link = "Metre per second",
},
["kn"] = {
name1 = "knot",
symbol = "kn",
utype = "speed",
scale = 0.51444444444444448,
default = "km/h mph",
link = "Knot (unit)",
},
["kNs/kg"] = {
name2 = "kN‑s/kg",
symbol = "kN‑s/kg",
utype = "speed",
scale = 1000,
default = "isp",
link = "Specific impulse",
},
["m/min"] = {
name1 = "metre per minute",
name1_us = "meter per minute",
name2 = "metres per minute",
name2_us = "meters per minute",
symbol = "m/min",
utype = "speed",
scale = 0.016666666666666666,
default = "ft/min",
link = "Metre per second",
},
["m/s"] = {
name1 = "metre per second",
name1_us = "meter per second",
name2 = "metres per second",
name2_us = "meters per second",
symbol = "m/s",
utype = "speed",
scale = 1,
default = "ft/s",
},
["Mach"] = {
name2 = "Mach",
symbol = "Mach",
utype = "speed",
builtin = "mach",
scale = 0,
iscomplex= true,
default = "km/h mph",
link = "Mach number",
},
["mi/d"] = {
name1 = "mile per day",
name2 = "miles per day",
symbol = "mi/d",
utype = "speed",
scale = 1.8626666666666667e-2,
default = "km/d",
link = "Orders of magnitude (speed)",
},
["mi/s"] = {
name1 = "mile per second",
name2 = "miles per second",
symbol = "mi/s",
utype = "speed",
scale = 1609.344,
default = "km/s",
link = "Mile",
},
["mm/h"] = {
name1 = "millimetre per hour",
name1_us = "millimeter per hour",
name2 = "millimetres per hour",
name2_us = "millimeters per hour",
symbol = "mm/h",
utype = "speed",
scale = 2.7777777777777781e-7,
default = "in/h",
link = "Metre per second",
},
["mph"] = {
name1 = "mile per hour",
name2 = "miles per hour",
symbol = "mph",
utype = "speed",
scale = 0.44704,
default = "km/h",
link = "Miles per hour",
},
["Ns/kg"] = {
name2 = "N‑s/kg",
symbol = "N‑s/kg",
utype = "speed",
scale = 1,
default = "isp",
link = "Specific impulse",
},
["si tsfc"] = {
name2 = "g/(kN⋅s)",
symbol = "g/(kN⋅s)",
utype = "speed",
scale = 9.9999628621379242e-7,
invert = -1,
iscomplex= true,
default = "tsfc",
link = "Thrust specific fuel consumption",
},
["tsfc"] = {
name2 = "lb/(lbf⋅h)",
symbol = "lb/(lbf⋅h)",
utype = "speed",
scale = 2.832545036049801e-5,
invert = -1,
iscomplex= true,
default = "si tsfc",
link = "Thrust specific fuel consumption",
},
["cm/y"] = {
target = "cm/year",
},
["cm/yr"] = {
target = "cm/year",
},
["in/y"] = {
target = "in/year",
},
["in/yr"] = {
target = "in/year",
},
["knot"] = {
target = "kn",
},
["knots"] = {
target = "kn",
},
["kph"] = {
target = "km/h",
},
["mi/h"] = {
target = "mph",
},
["mm/s"] = {
per = { "mm", "s" },
utype = "speed",
default = "in/s",
link = "Metre per second",
},
["C"] = {
name1 = "degree Celsius",
name2 = "degrees Celsius",
symbol = "°C",
usesymbol= 1,
utype = "temperature",
scale = 1,
offset = -273.15,
iscomplex= true,
istemperature= true,
default = "F",
link = "Celsius",
},
["F"] = {
name1 = "degree Fahrenheit",
name2 = "degrees Fahrenheit",
symbol = "°F",
usesymbol= 1,
utype = "temperature",
scale = 0.55555555555555558,
offset = 32-273.15*(9/5),
iscomplex= true,
istemperature= true,
default = "C",
link = "Fahrenheit",
},
["K"] = {
_name1 = "kelvin",
_symbol = "K",
usesymbol= 1,
utype = "temperature",
scale = 1,
offset = 0,
iscomplex= true,
istemperature= true,
prefixes = 1,
default = "C F",
link = "Kelvin",
},
["keVT"] = {
name1 = "kiloelectronvolt",
symbol = "keV",
utype = "temperature",
scale = 11.604505e6,
offset = 0,
iscomplex= true,
default = "MK",
link = "Electronvolt",
},
["R"] = {
name1 = "degree Rankine",
name2 = "degrees Rankine",
symbol = "°R",
usesymbol= 1,
utype = "temperature",
scale = 0.55555555555555558,
offset = 0,
iscomplex= true,
istemperature= true,
default = "K F C",
link = "Rankine scale",
},
["Celsius"] = {
target = "C",
},
["°C"] = {
target = "C",
},
["°F"] = {
target = "F",
},
["°R"] = {
target = "R",
},
["C-change"] = {
name1 = "degree Celsius change",
name2 = "degrees Celsius change",
symbol = "°C",
usesymbol= 1,
utype = "temperature change",
scale = 1,
default = "F-change",
link = "Celsius",
},
["F-change"] = {
name1 = "degree Fahrenheit change",
name2 = "degrees Fahrenheit change",
symbol = "°F",
usesymbol= 1,
utype = "temperature change",
scale = 0.55555555555555558,
default = "C-change",
link = "Fahrenheit",
},
["K-change"] = {
name1 = "kelvin change",
name2 = "kelvins change",
symbol = "K",
usesymbol= 1,
utype = "temperature change",
scale = 1,
default = "F-change",
link = "Kelvin",
},
["°C-change"] = {
target = "C-change",
},
["°F-change"] = {
target = "F-change",
},
["century"] = {
name1 = "century",
name2 = "centuries",
symbol = "ha",
utype = "time",
scale = 3155760000,
default = "Gs",
},
["d"] = {
name1 = "day",
symbol = "d",
utype = "time",
scale = 86400,
default = "ks",
},
["decade"] = {
name1 = "decade",
symbol = "daa",
utype = "time",
scale = 315576000,
default = "Ms",
},
["dog year"] = {
name1 = "dog year",
symbol = "dog yr",
utype = "time",
scale = 220903200,
default = "years",
link = "List of unusual units of measurement#Dog year",
},
["fortnight"] = {
symbol = "fortnight",
usename = 1,
utype = "time",
scale = 1209600,
default = "week",
},
["h"] = {
name1 = "hour",
symbol = "h",
utype = "time",
scale = 3600,
default = "ks",
},
["long billion year"] = {
name1 = "billion years",
name2 = "billion years",
symbol = "Ta",
utype = "time",
scale = 31557600000000000000,
default = "Es",
link = "Annum",
},
["millennium"] = {
name1 = "millennium",
name2 = "millennia",
symbol = "ka",
utype = "time",
scale = 31557600000,
default = "Gs",
},
["milliard year"] = {
name1 = "milliard years",
name2 = "milliard years",
symbol = "Ga",
utype = "time",
scale = 31557600000000000,
default = "Ps",
link = "Annum",
},
["million year"] = {
name1 = "million years",
name2 = "million years",
symbol = "Ma",
utype = "time",
scale = 31557600000000,
default = "Ts",
link = "Annum",
},
["min"] = {
name1 = "minute",
symbol = "min",
utype = "time",
scale = 60,
default = "s",
},
["month"] = {
symbol = "month",
usename = 1,
utype = "time",
scale = 2629800,
default = "Ms",
},
["months"] = {
name1 = "month",
symbol = "mo",
utype = "time",
scale = 2629800,
default = "year",
},
["s"] = {
_name1 = "second",
_symbol = "s",
utype = "time",
scale = 1,
prefixes = 1,
default = "min",
link = "Second",
},
["short billion year"] = {
name1 = "billion years",
name2 = "billion years",
symbol = "Ga",
utype = "time",
scale = 31557600000000000,
default = "Ps",
link = "Annum",
},
["short trillion year"] = {
name1 = "trillion years",
name2 = "trillion years",
symbol = "Ta",
utype = "time",
scale = 31557600000000000000,
default = "Es",
link = "Annum",
},
["thousand million year"] = {
name1 = "thousand million years",
name2 = "thousand million years",
symbol = "Ga",
utype = "time",
scale = 31557600000000000,
default = "Ps",
link = "Annum",
},
["wk"] = {
symbol = "week",
usename = 1,
utype = "time",
scale = 604800,
default = "Ms",
},
["year"] = {
name1 = "year",
symbol = "a",
utype = "time",
scale = 31557600,
default = "Ms",
link = "Annum",
},
["years"] = {
name1 = "year",
symbol = "yr",
utype = "time",
scale = 31557600,
default = "Ms",
link = "Annum",
},
["byr"] = {
target = "short billion year",
},
["day"] = {
target = "d",
},
["days"] = {
target = "d",
},
["dog yr"] = {
target = "dog year",
},
["Gyr"] = {
target = "thousand million year",
},
["hour"] = {
target = "h",
},
["hours"] = {
target = "h",
},
["kMyr"] = {
target = "thousand million year",
},
["kmyr"] = {
target = "thousand million year",
},
["kyr"] = {
target = "millennium",
},
["long byr"] = {
target = "long billion year",
},
["minute"] = {
target = "min",
},
["minutes"] = {
target = "min",
},
["mth"] = {
target = "month",
},
["Myr"] = {
target = "million year",
},
["myr"] = {
target = "million year",
},
["second"] = {
target = "s",
},
["seconds"] = {
target = "s",
},
["tmyr"] = {
target = "thousand million year",
},
["tryr"] = {
target = "short trillion year",
},
["tyr"] = {
target = "millennium",
},
["week"] = {
target = "wk",
},
["weeks"] = {
target = "wk",
},
["yr"] = {
target = "year",
},
["kg.m"] = {
name1 = "kilogram metre",
name1_us = "kilogram meter",
symbol = "kg⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbft",
link = "Kilogram metre (torque)",
},
["kgf.m"] = {
name1 = "kilogram force-metre",
name1_us = "kilogram force-meter",
symbol = "kgf⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["kgm"] = {
name1 = "kilogram metre",
name1_us = "kilogram meter",
symbol = "kg⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["kpm"] = {
name1 = "kilopond metre",
name1_us = "kilopond meter",
symbol = "kp⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbft",
link = "Kilogram metre (torque)",
},
["lb-fft"] = {
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "ft⋅lb<sub>f</sub>",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["lb.ft"] = {
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "lb⋅ft",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["lb.in"] = {
name1 = "pound force-inch",
symbol = "lb⋅in",
utype = "torque",
scale = 0.1129848290276167,
default = "mN.m",
link = "Pound-foot (torque)",
},
["lbfft"] = {
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "lbf⋅ft",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["lbft"] = {
name1 = "pound-foot",
name2 = "pound-feet",
symbol = "lb⋅ft",
utype = "torque",
scale = 1.3558179483314004,
default = "Nm",
link = "Pound-foot (torque)",
},
["m.kg-f"] = {
name1 = "metre kilogram-force",
name1_us = "meter kilogram-force",
name2 = "metre kilograms-force",
name2_us = "meter kilograms-force",
symbol = "m⋅kg<sub>f</sub>",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["m.kgf"] = {
name1 = "metre kilogram-force",
name1_us = "meter kilogram-force",
name2 = "metre kilograms-force",
name2_us = "meter kilograms-force",
symbol = "m⋅kgf",
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["mN.m"] = {
name1 = "millinewton-metre",
name1_us = "millinewton-meter",
symbol = "mN⋅m",
utype = "torque",
scale = 0.001,
default = "lb.in",
link = "Newton-metre",
},
["Nm"] = {
_name1 = "newton-metre",
_name1_us= "newton-meter",
_symbol = "N⋅m",
utype = "torque",
alttype = "energy",
scale = 1,
prefixes = 1,
default = "lbfft",
link = "Newton-metre",
},
["kN/m"] = {
per = { "kN", "-m-stiff" },
utype = "torque",
default = "lbf/in",
},
["lbf/in"] = {
per = { "lbf", "-in-stiff" },
utype = "torque",
default = "kN/m",
},
["lb-f.ft"] = {
target = "lb-fft",
},
["lbf.ft"] = {
target = "lbfft",
},
["lbf·ft"] = {
target = "lbfft",
},
["lb·ft"] = {
target = "lb.ft",
},
["mkg-f"] = {
target = "m.kg-f",
},
["mkgf"] = {
target = "m.kgf",
},
["N.m"] = {
target = "Nm",
},
["N·m"] = {
target = "Nm",
},
["ton-mile"] = {
symbol = "ton-mile",
usename = 1,
utype = "transportation",
scale = 1.4599723182105602,
default = "tkm",
},
["tkm"] = {
name1 = "tonne-kilometre",
name1_us = "tonne-kilometer",
symbol = "tkm",
utype = "transportation",
scale = 1,
default = "ton-mile",
},
["-12USoz(mL)serve"] = {
name1_us = "12 U.S. fl oz (355 mL) serving",
symbol = "12 US fl oz (355 mL) serving",
sym_us = "12 U.S. fl oz (355 mL) serving",
utype = "volume",
scale = 0.00035488235475000004,
default = "mL",
link = "Beverage can#Standard sizes",
},
["-12USoz(ml)serve"] = {
name1_us = "12 U.S. fl oz (355 ml) serving",
symbol = "12 US fl oz (355 ml) serving",
sym_us = "12 U.S. fl oz (355 ml) serving",
utype = "volume",
scale = 0.00035488235475000004,
default = "ml",
link = "Beverage can#Standard sizes",
},
["-12USozserve"] = {
name1_us = "12 U.S. fl oz serving",
symbol = "12 US fl oz serving",
sym_us = "12 U.S. fl oz serving",
utype = "volume",
scale = 0.00035488235475000004,
default = "mL",
link = "Beverage can#Standard sizes",
},
["acre-foot"] = {
name1 = "acre-foot",
name2 = "acre-foot",
symbol = "acre⋅ft",
utype = "volume",
scale = 1233.48183754752,
default = "m3",
},
["acre-ft"] = {
name1 = "acre-foot",
name2 = "acre-feet",
symbol = "acre⋅ft",
utype = "volume",
scale = 1233.48183754752,
default = "m3",
},
["AUtbsp"] = {
name1 = "Australian tablespoon",
symbol = "AU tbsp",
utype = "volume",
scale = 0.000020,
default = "ml",
},
["Bcuft"] = {
name1 = "billion cubic foot",
name2 = "billion cubic feet",
symbol = "billion cu ft",
utype = "volume",
scale = 28316846.592,
default = "Gl",
link = "Cubic foot",
},
["bdft"] = {
name1 = "board foot",
name2 = "board feet",
symbol = "bd ft",
utype = "volume",
scale = 0.0023597372167,
default = "m3",
},
["board feet"] = {
name2 = "board feet",
symbol = "board foot",
usename = 1,
utype = "volume",
scale = 0.0023597372167,
default = "m3",
},
["board foot"] = {
name2 = "board foot",
symbol = "board foot",
usename = 1,
utype = "volume",
scale = 0.0023597372167,
default = "m3",
},
["cc"] = {
name1 = "cubic centimetre",
name1_us = "cubic centimeter",
symbol = "cc",
utype = "volume",
scale = 0.000001,
default = "cuin",
},
["CID"] = {
name1 = "cubic inch",
name2 = "cubic inches",
symbol = "cu in",
utype = "volume",
scale = 0.000016387064,
default = "cc",
link = "Cubic inch#Engine displacement",
},
["cord"] = {
symbol = "cord",
utype = "volume",
scale = 3.624556363776,
default = "m3",
link = "Cord (unit)",
},
["cufoot"] = {
name1 = "cubic foot",
name2 = "cubic foot",
symbol = "cu ft",
utype = "volume",
scale = 0.028316846592,
default = "m3",
},
["cuft"] = {
name1 = "cubic foot",
name2 = "cubic feet",
symbol = "cu ft",
utype = "volume",
scale = 0.028316846592,
default = "m3",
},
["cuin"] = {
name1 = "cubic inch",
name2 = "cubic inches",
symbol = "cu in",
utype = "volume",
scale = 0.000016387064,
default = "cm3",
},
["cumi"] = {
name1 = "cubic mile",
symbol = "cu mi",
utype = "volume",
scale = 4168181825.440579584,
default = "km3",
},
["cuyd"] = {
name1 = "cubic yard",
symbol = "cu yd",
utype = "volume",
scale = 0.764554857984,
default = "m3",
},
["firkin"] = {
symbol = "firkin",
usename = 1,
utype = "volume",
scale = 0.04091481,
default = "l impgal USgal",
link = "Firkin (unit)",
},
["foot3"] = {
target = "cufoot",
},
["Goilbbl"] = {
name1 = "billion barrels",
name2 = "billion barrels",
symbol = "Gbbl",
utype = "volume",
scale = 158987294.928,
default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["gr water"] = {
name1 = "grains water",
name2 = "grains water",
symbol = "gr H<sub>2</sub>O",
utype = "volume",
scale = 0.00000006479891,
default = "cm3",
link = "Grain (unit)",
},
["grt"] = {
name1 = "gross register ton",
symbol = "grt",
utype = "volume",
scale = 2.8316846592,
default = "m3",
link = "Gross register tonnage",
},
["impbbl"] = {
name1 = "imperial barrel",
symbol = "imp bbl",
utype = "volume",
scale = 0.16365924,
default = "l impgal USgal",
link = "Barrel (unit)",
},
["impbsh"] = {
name1 = "imperial bushel",
symbol = "imp bsh",
utype = "volume",
scale = 0.03636872,
default = "l impgal USdrygal",
},
["impbu"] = {
name1 = "imperial bushel",
symbol = "imp bu",
utype = "volume",
scale = 0.03636872,
default = "m3",
},
["impgal"] = {
name1 = "imperial gallon",
symbol = "imp gal",
utype = "volume",
scale = 0.00454609,
default = "l USgal",
},
["impgi"] = {
name1 = "gill",
symbol = "gi",
utype = "volume",
scale = 0.0001420653125,
default = "ml USoz",
link = "Gill (unit)",
},
["impkenning"] = {
name1 = "imperial kenning",
symbol = "kenning",
utype = "volume",
scale = 0.01818436,
default = "l USdrygal",
link = "Kenning (unit)",
},
["impoz"] = {
name1 = "imperial fluid ounce",
symbol = "imp fl oz",
utype = "volume",
scale = 0.0000284130625,
default = "ml USoz",
},
["imppk"] = {
name1 = "imperial peck",
symbol = "pk",
utype = "volume",
scale = 0.00909218,
default = "l USdrygal",
link = "Peck",
},
["imppt"] = {
name1 = "imperial pint",
symbol = "imp pt",
utype = "volume",
scale = 0.00056826125,
default = "l",
},
["impqt"] = {
name1 = "imperial quart",
symbol = "imp qt",
utype = "volume",
scale = 0.0011365225,
default = "ml USoz",
customary= 3,
},
["kilderkin"] = {
symbol = "kilderkin",
usename = 1,
utype = "volume",
scale = 0.08182962,
default = "l impgal USgal",
},
["koilbbl"] = {
name1 = "thousand barrels",
name2 = "thousand barrels",
symbol = "kbbl",
utype = "volume",
scale = 158.987294928,
default = "v * 1.58987294928 < 10 ! ! e3 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["L"] = {
_name1 = "litre",
_name1_us= "liter",
_symbol = "L",
utype = "volume",
scale = 0.001,
prefixes = 1,
default = "impgal USgal",
link = "Litre",
},
["l"] = {
_name1 = "litre",
_name1_us= "liter",
_symbol = "l",
utype = "volume",
scale = 0.001,
prefixes = 1,
default = "impgal USgal",
link = "Litre",
},
["m3"] = {
_name1 = "cubic metre",
_name1_us= "cubic meter",
_symbol = "m<sup>3</sup>",
prefix_position= 7,
utype = "volume",
scale = 1,
prefixes = 3,
default = "cuft",
link = "Cubic metre",
},
["Mbbl"] = {
name1 = "thousand barrels",
name2 = "thousand barrels",
symbol = "Mbbl",
utype = "volume",
scale = 158.987294928,
default = "v * 1.58987294928 < 10 ! e3 ! ! m3",
link = "Barrel (unit)#Oil barrel",
},
["MMoilbbl"] = {
name1 = "million barrels",
name2 = "million barrels",
symbol = "MMbbl",
utype = "volume",
scale = 158987.294928,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["Moilbbl"] = {
name1 = "million barrels",
name2 = "million barrels",
symbol = "Mbbl",
utype = "volume",
scale = 158987.294928,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["MTON"] = {
name1 = "measurement ton",
symbol = "MTON",
utype = "volume",
scale = 1.13267386368,
default = "m3",
},
["MUSgal"] = {
name1 = "million US gallons",
name1_us = "million U.S. gallons",
name2 = "million US gallons",
name2_us = "million U.S. gallons",
symbol = "million US gal",
sym_us = "million U.S. gal",
utype = "volume",
scale = 3785.411784,
default = "Ml",
link = "US gallon",
},
["oilbbl"] = {
name1 = "barrel",
symbol = "bbl",
utype = "volume",
scale = 0.158987294928,
default = "m3",
link = "Barrel (unit)#Oil barrel",
},
["stere"] = {
symbol = "stere",
usename = 1,
utype = "volume",
scale = 1,
default = "cuft",
},
["Toilbbl"] = {
name1 = "trillion barrels",
name2 = "trillion barrels",
symbol = "Tbbl",
utype = "volume",
scale = 158987294928,
default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3",
link = "Barrel (unit)#Oil barrel",
},
["USbbl"] = {
name1 = "US barrel",
name1_us = "U.S. barrel",
symbol = "US bbl",
sym_us = "U.S. bbl",
utype = "volume",
scale = 0.119240471196,
default = "l USgal impgal",
link = "Barrel (unit)",
},
["USbeerbbl"] = {
name1 = "US beer barrel",
name1_us = "U.S. beer barrel",
symbol = "US bbl",
sym_us = "U.S. bbl",
utype = "volume",
scale = 0.117347765304,
default = "l USgal impgal",
link = "Barrel (unit)",
},
["USbsh"] = {
name1 = "US bushel",
name1_us = "U.S. bushel",
symbol = "US bsh",
sym_us = "U.S. bsh",
utype = "volume",
scale = 0.03523907016688,
default = "l USdrygal impgal",
link = "Bushel",
},
["USbu"] = {
name1 = "US bushel",
name1_us = "U.S. bushel",
symbol = "US bu",
sym_us = "U.S. bu",
utype = "volume",
scale = 0.03523907016688,
default = "l USdrygal impgal",
link = "Bushel",
},
["USdrybbl"] = {
name1 = "US dry barrel",
name1_us = "U.S. dry barrel",
symbol = "US dry bbl",
sym_us = "U.S. dry bbl",
utype = "volume",
scale = 0.11562819898508,
default = "m3",
link = "Barrel (unit)",
},
["USdrygal"] = {
name1 = "US dry gallon",
name1_us = "U.S. dry gallon",
symbol = "US dry gal",
sym_us = "U.S. dry gal",
utype = "volume",
scale = 0.00440488377086,
default = "l",
link = "Gallon",
},
["USdrypt"] = {
name1 = "US dry pint",
name1_us = "U.S. dry pint",
symbol = "US dry pt",
sym_us = "U.S. dry pt",
utype = "volume",
scale = 0.0005506104713575,
default = "ml",
link = "Pint",
},
["USdryqt"] = {
name1 = "US dry quart",
name1_us = "U.S. dry quart",
symbol = "US dry qt",
sym_us = "U.S. dry qt",
utype = "volume",
scale = 0.001101220942715,
default = "ml",
link = "Quart",
},
["USflgal"] = {
name1 = "US gallon",
name1_us = "U.S. gallon",
symbol = "US fl gal",
sym_us = "U.S. fl gal",
utype = "volume",
scale = 0.003785411784,
default = "l impgal",
link = "Gallon",
},
["USgal"] = {
name1 = "US gallon",
name1_us = "U.S. gallon",
symbol = "US gal",
sym_us = "U.S. gal",
utype = "volume",
scale = 0.003785411784,
default = "l impgal",
},
["USgi"] = {
name1 = "gill",
symbol = "gi",
utype = "volume",
scale = 0.0001182941183,
default = "ml impoz",
link = "Gill (unit)",
},
["USkenning"] = {
name1 = "US kenning",
name1_us = "U.S. kenning",
symbol = "US kenning",
sym_us = "U.S. kenning",
utype = "volume",
scale = 0.01761953508344,
default = "l impgal",
link = "Kenning (unit)",
},
["USmin"] = {
name1 = "US minim",
name1_us = "U.S. minim",
symbol = "US min",
sym_us = "U.S. min",
utype = "volume",
scale = 0.000000061611519921875,
default = "ml",
link = "Minim (unit)",
},
["USoz"] = {
name1 = "US fluid ounce",
name1_us = "U.S. fluid ounce",
symbol = "US fl oz",
sym_us = "U.S. fl oz",
utype = "volume",
scale = 0.0000295735295625,
default = "ml",
},
["USpk"] = {
name1 = "US peck",
name1_us = "U.S. peck",
symbol = "US pk",
sym_us = "U.S. pk",
utype = "volume",
scale = 0.00880976754172,
default = "l impgal",
link = "Peck",
},
["USpt"] = {
name1 = "US pint",
name1_us = "U.S. pint",
symbol = "US pt",
sym_us = "U.S. pt",
utype = "volume",
scale = 0.000473176473,
default = "l imppt",
link = "Pint",
},
["USqt"] = {
name1 = "US quart",
name1_us = "U.S. quart",
symbol = "US qt",
sym_us = "U.S. qt",
utype = "volume",
scale = 0.000946352946,
default = "ml",
link = "Quart",
customary= 1,
},
["USquart"] = {
name1 = "US quart",
name1_us = "U.S. quart",
symbol = "US qt",
sym_us = "U.S. qt",
utype = "volume",
scale = 0.000946352946,
default = "ml impoz",
link = "Quart",
},
["UStbsp"] = {
name1 = "US tablespoon",
name1_us = "U.S. tablespoon",
symbol = "US tbsp",
sym_us = "U.S. tbsp",
utype = "volume",
scale = 1.4786764781250001e-5,
default = "ml",
},
["winecase"] = {
symbol = "case",
usename = 1,
utype = "volume",
scale = 0.009,
default = "l",
link = "Case (goods)",
},
["*U.S.drygal"] = {
target = "USdrygal",
sp_us = true,
customary= 2,
},
["*U.S.gal"] = {
target = "USgal",
sp_us = true,
default = "L impgal",
customary= 2,
},
["+USdrygal"] = {
target = "USdrygal",
customary= 1,
},
["+usfloz"] = {
target = "USoz",
link = "Fluid ounce",
customary= 1,
},
["+USgal"] = {
target = "USgal",
customary= 1,
},
["+USoz"] = {
target = "USoz",
customary= 1,
},
["@impgal"] = {
target = "impgal",
link = "Gallon",
customary= 3,
},
["acre feet"] = {
target = "acre-ft",
},
["acre foot"] = {
target = "acre-foot",
},
["acre ft"] = {
target = "acre-ft",
},
["acre-feet"] = {
target = "acre-ft",
},
["acre.foot"] = {
target = "acre-foot",
},
["acre.ft"] = {
target = "acre-ft",
},
["acre·ft"] = {
target = "acre-ft",
},
["bushels"] = {
target = "USbsh",
},
["cid"] = {
target = "CID",
},
["ft3"] = {
target = "cuft",
},
["gal"] = {
target = "USgal",
},
["gallon"] = {
shouldbe = "Use %{USgal%} for US gallons or %{impgal%} for imperial gallons (not %{gallon%})",
},
["gallons"] = {
shouldbe = "Use %{USgal%} for US gallons or %{impgal%} for imperial gallons (not %{gallons%})",
},
["Gcuft"] = {
target = "e9cuft",
},
["impfloz"] = {
target = "impoz",
},
["Impgal"] = {
target = "impgal",
},
["in3"] = {
target = "cuin",
symbol = "in<sup>3</sup>",
},
["kcuft"] = {
target = "e3cuft",
},
["kcum"] = {
target = "e3m3",
},
["km³"] = {
target = "km3",
},
["liter"] = {
target = "L",
sp_us = true,
},
["liters"] = {
target = "L",
sp_us = true,
},
["litre"] = {
target = "L",
},
["litres"] = {
target = "L",
},
["Mcuft"] = {
target = "e6cuft",
},
["Mcum"] = {
target = "e6m3",
},
["Mft3"] = {
target = "e6cuft",
},
["mi3"] = {
target = "cumi",
},
["m³"] = {
target = "m3",
},
["Pcuft"] = {
target = "e15cuft",
},
["pt"] = {
shouldbe = "Use %{USpt%} for US pints or %{imppt%} for imperial pints (not %{pt%})",
},
["qt"] = {
shouldbe = "Use %{USqt%} for US quarts or %{impqt%} for imperial quarts (not %{qt%})",
},
["Tcuft"] = {
target = "e12cuft",
},
["Tft3"] = {
target = "e12cuft",
},
["U.S.bbl"] = {
target = "USbbl",
sp_us = true,
default = "l U.S.gal impgal",
},
["U.S.beerbbl"] = {
target = "USbeerbbl",
sp_us = true,
default = "l U.S.gal impgal",
},
["U.S.bsh"] = {
target = "USbsh",
sp_us = true,
default = "l U.S.drygal impgal",
},
["U.S.bu"] = {
target = "USbu",
sp_us = true,
default = "l U.S.drygal impgal",
},
["U.S.drybbl"] = {
target = "USdrybbl",
sp_us = true,
},
["U.S.drygal"] = {
target = "USdrygal",
sp_us = true,
},
["U.S.drypt"] = {
target = "USdrypt",
sp_us = true,
},
["U.S.dryqt"] = {
target = "USdryqt",
sp_us = true,
},
["U.S.flgal"] = {
target = "USflgal",
sp_us = true,
},
["U.S.floz"] = {
target = "USoz",
sp_us = true,
},
["U.S.gal"] = {
target = "USgal",
sp_us = true,
default = "L impgal",
link = "U.S. gallon",
},
["u.s.gal"] = {
target = "USgal",
sp_us = true,
default = "L impgal",
link = "U.S. gallon",
},
["U.S.gi"] = {
target = "USgi",
sp_us = true,
},
["U.S.kenning"] = {
target = "USkenning",
sp_us = true,
},
["U.S.oz"] = {
target = "USoz",
sp_us = true,
},
["U.S.pk"] = {
target = "USpk",
sp_us = true,
},
["U.S.pt"] = {
target = "USpt",
sp_us = true,
},
["U.S.qt"] = {
target = "USqt",
sp_us = true,
default = "L impqt",
customary= 2,
},
["usbbl"] = {
target = "USbbl",
},
["usbeerbbl"] = {
target = "USbeerbbl",
},
["usbsh"] = {
target = "USbsh",
},
["usbu"] = {
target = "USbu",
},
["usdrybbl"] = {
target = "USdrybbl",
},
["usdrygal"] = {
target = "USdrygal",
},
["usdrypt"] = {
target = "USdrypt",
},
["usdryqt"] = {
target = "USdryqt",
},
["USfloz"] = {
target = "USoz",
},
["usfloz"] = {
target = "USoz",
},
["USGAL"] = {
target = "USgal",
},
["usgal"] = {
target = "USgal",
},
["usgi"] = {
target = "USgi",
},
["uskenning"] = {
target = "USkenning",
},
["usoz"] = {
target = "USoz",
},
["uspk"] = {
target = "USpk",
},
["uspt"] = {
target = "USpt",
},
["usqt"] = {
target = "USqt",
},
["yd3"] = {
target = "cuyd",
},
["cuft/sqmi"] = {
per = { "cuft", "sqmi" },
utype = "volume per unit area",
default = "m3/km2",
},
["m3/ha"] = {
name1 = "cubic metre per hectare",
name1_us = "cubic meter per hectare",
name2 = "cubic metres per hectare",
name2_us = "cubic meters per hectare",
symbol = "m<sup>3</sup>/ha",
utype = "volume per unit area",
scale = 0.0001,
default = "USbu/acre",
link = "Hectare",
},
["m3/km2"] = {
per = { "m3", "km2" },
utype = "volume per unit area",
default = "cuft/sqmi",
},
["U.S.gal/acre"] = {
per = { "U.S.gal", "acre" },
utype = "volume per unit area",
default = "m3/km2",
},
["USbu/acre"] = {
name2 = "US bushels per acre",
symbol = "US bushel per acre",
usename = 1,
utype = "volume per unit area",
scale = 8.7077638761350888e-6,
default = "m3/ha",
link = "Bushel",
},
["USgal/acre"] = {
per = { "USgal", "acre" },
utype = "volume per unit area",
default = "m3/km2",
},
["cuyd/mi"] = {
per = { "cuyd", "mi" },
utype = "volume per unit length",
default = "m3/km",
},
["m3/km"] = {
per = { "m3", "km" },
utype = "volume per unit length",
default = "cuyd/mi",
},
["mich"] = {
combination= { "ch", "mi" },
multiple = { 80 },
utype = "length",
},
["michlk"] = {
combination= { "chlk", "mi" },
multiple = { 80 },
utype = "length",
},
["michainlk"] = {
combination= { "chainlk", "mi" },
multiple = { 80 },
utype = "length",
},
["miyd"] = {
combination= { "yd", "mi" },
multiple = { 1760 },
utype = "length",
},
["miydftin"] = {
combination= { "in", "ft", "yd", "mi" },
multiple = { 12, 3, 1760 },
utype = "length",
},
["mift"] = {
combination= { "ft", "mi" },
multiple = { 5280 },
utype = "length",
},
["ydftin"] = {
combination= { "in", "ft", "yd" },
multiple = { 12, 3 },
utype = "length",
},
["ydft"] = {
combination= { "ft", "yd" },
multiple = { 3 },
utype = "length",
},
["ftin"] = {
combination= { "in", "ft" },
multiple = { 12 },
utype = "length",
},
["footin"] = {
combination= { "in", "foot" },
multiple = { 12 },
utype = "length",
},
["handin"] = {
combination= { "in", "hand" },
multiple = { 4 },
utype = "length",
},
["lboz"] = {
combination= { "oz", "lb" },
multiple = { 16 },
utype = "mass",
},
["stlb"] = {
combination= { "lb", "st" },
multiple = { 14 },
utype = "mass",
},
["stlboz"] = {
combination= { "oz", "lb", "st" },
multiple = { 16, 14 },
utype = "mass",
},
["st and lb"] = {
combination= { "lb", "st" },
multiple = { 14 },
utype = "mass",
},
["GN LTf"] = {
combination= { "GN", "-LTf" },
utype = "force",
},
["GN LTf STf"] = {
combination= { "GN", "-LTf", "-STf" },
utype = "force",
},
["GN STf"] = {
combination= { "GN", "-STf" },
utype = "force",
},
["GN STf LTf"] = {
combination= { "GN", "-STf", "-LTf" },
utype = "force",
},
["kN LTf"] = {
combination= { "kN", "-LTf" },
utype = "force",
},
["kN LTf STf"] = {
combination= { "kN", "-LTf", "-STf" },
utype = "force",
},
["kN STf"] = {
combination= { "kN", "-STf" },
utype = "force",
},
["kN STf LTf"] = {
combination= { "kN", "-STf", "-LTf" },
utype = "force",
},
["LTf STf"] = {
combination= { "-LTf", "-STf" },
utype = "force",
},
["MN LTf"] = {
combination= { "MN", "-LTf" },
utype = "force",
},
["MN LTf STf"] = {
combination= { "MN", "-LTf", "-STf" },
utype = "force",
},
["MN STf"] = {
combination= { "MN", "-STf" },
utype = "force",
},
["MN STf LTf"] = {
combination= { "MN", "-STf", "-LTf" },
utype = "force",
},
["STf LTf"] = {
combination= { "-STf", "-LTf" },
utype = "force",
},
["L/100 km mpgimp"] = {
combination= { "L/100 km", "mpgimp" },
utype = "fuel efficiency",
},
["l/100 km mpgimp"] = {
combination= { "l/100 km", "mpgimp" },
utype = "fuel efficiency",
},
["L/100 km mpgUS"] = {
combination= { "L/100 km", "mpgus" },
utype = "fuel efficiency",
},
["L/100 km mpgus"] = {
combination= { "L/100 km", "mpgus" },
utype = "fuel efficiency",
},
["l/100 km mpgus"] = {
combination= { "l/100 km", "mpgus" },
utype = "fuel efficiency",
},
["mpgimp L/100 km"] = {
combination= { "mpgimp", "L/100 km" },
utype = "fuel efficiency",
},
["LT ST t"] = {
combination= { "lt", "-ST", "t" },
utype = "mass",
},
["LT t ST"] = {
combination= { "lt", "t", "-ST" },
utype = "mass",
},
["ST LT t"] = {
combination= { "-ST", "lt", "t" },
utype = "mass",
},
["ST t LT"] = {
combination= { "-ST", "t", "lt" },
utype = "mass",
},
["t LT ST"] = {
combination= { "t", "lt", "-ST" },
utype = "mass",
},
["ton"] = {
combination= { "LT", "ST" },
utype = "mass",
},
["kPa kg/cm2"] = {
combination= { "kPa", "kgf/cm2" },
utype = "pressure",
},
["kPa lb/in2"] = {
combination= { "kPa", "-lb/in2" },
utype = "pressure",
},
["floz"] = {
combination= { "impoz", "USoz" },
utype = "volume",
},
}
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local default_exceptions = {
-- Prefixed units with a default different from that of the base unit.
-- Each key item is a prefixed symbol (unitcode for engineering notation).
["cm<sup>2</sup>"] = "sqin",
["dm<sup>2</sup>"] = "sqin",
["e3acre"] = "km2",
["e3m2"] = "e6sqft",
["e6acre"] = "km2",
["e6ha"] = "e6acre",
["e6km2"] = "e6sqmi",
["e6m2"] = "e6sqft",
["e6sqft"] = "v * 9.290304 < 100 ! e3 ! e6 ! m2",
["e6sqmi"] = "e6km2",
["hm<sup>2</sup>"] = "acre",
["km<sup>2</sup>"] = "sqmi",
["mm<sup>2</sup>"] = "sqin",
["aJ"] = "eV",
["e3BTU"] = "MJ",
["e6BTU"] = "GJ",
["EJ"] = "kWh",
["fJ"] = "keV",
["GJ"] = "kWh",
["MJ"] = "kWh",
["PJ"] = "kWh",
["pJ"] = "MeV",
["TJ"] = "kWh",
["YJ"] = "kWh",
["yJ"] = "μeV",
["ZJ"] = "kWh",
["zJ"] = "meV",
["e12cuft/a"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/a",
["e12cuft/d"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/d",
["e12m3/a"] = "Tcuft/a",
["e12m3/d"] = "Tcuft/d",
["e3cuft/a"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/a",
["e3cuft/d"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/d",
["e3cuft/s"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/s",
["e3m3/a"] = "v < 28.316846592 ! k ! M ! cuft/a",
["e3m3/d"] = "v < 28.316846592 ! k ! M ! cuft/d",
["e3m3/s"] = "v < 28.316846592 ! k ! M ! cuft/s",
["e3USgal/a"] = "v * 3.785411784 < 1000 ! ! e3 ! m3/a",
["e6cuft/a"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/a",
["e6cuft/d"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/d",
["e6cuft/s"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/s",
["e6m3/a"] = "v < 28.316846592 ! M ! G ! cuft/a",
["e6m3/d"] = "v < 28.316846592 ! M ! G ! cuft/d",
["e6m3/s"] = "v < 28.316846592 ! e6 ! e9 ! cuft/s",
["e6USgal/a"] = "v * 3.785411784 < 1000 ! e3 ! e6 ! m3/a",
["e9cuft/a"] = "m3/a",
["e9cuft/d"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3/d",
["e9m3/a"] = "v < 28.316846592 ! G ! T ! cuft/a",
["e9m3/d"] = "v < 28.316846592 ! G ! T ! cuft/d",
["e9m3/s"] = "v < 28.316846592 ! e9 ! e12 ! cuft/s",
["e9USgal/a"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/a",
["e9USgal/s"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/s",
["nN"] = "gr-f",
["μN"] = "gr-f",
["mN"] = "oz-f",
["am"] = "in",
["cm"] = "in",
["dam"] = "ft",
["dm"] = "in",
["e12km"] = "e12mi",
["e12mi"] = "e12km",
["e3AU"] = "ly",
["e3km"] = "e3mi",
["e3mi"] = "e3km",
["e6km"] = "e6mi",
["e6mi"] = "e6km",
["e9km"] = "AU",
["e9mi"] = "e9km",
["Em"] = "mi",
["fm"] = "in",
["Gm"] = "mi",
["hm"] = "ft",
["km"] = "mi",
["mm"] = "in",
["Mm"] = "mi",
["nm"] = "in",
["Pm"] = "mi",
["pm"] = "in",
["Tm"] = "mi",
["Ym"] = "mi",
["ym"] = "in",
["Zm"] = "mi",
["zm"] = "in",
["μm"] = "in",
["e12lb"] = "v * 4.5359237 < 10 ! Mt ! Gt",
["e3lb"] = "v * 4.5359237 < 10 ! kg ! t",
["e3ozt"] = "v * 0.311034768 < 10 ! kg ! t",
["e3t"] = "LT ST",
["e6carat"] = "t",
["e6lb"] = "v * 4.5359237 < 10 ! t ! kilotonne",
["e6ozt"] = "lb kg",
["e6ST"] = "Mt",
["e6t"] = "LT ST",
["e9lb"] = "v * 4.5359237 < 10 ! kilotonne ! Mt",
["e9t"] = "LT ST",
["Gg"] = "lb",
["kg"] = "lb",
["mg"] = "gr",
["Mg"] = "LT ST",
["ng"] = "gr",
["μg"] = "gr",
["mBq"] = "fCi",
["kBq"] = "nCi",
["MBq"] = "μCi",
["GBq"] = "mCi",
["TBq"] = "Ci",
["PBq"] = "kCi",
["EBq"] = "kCi",
["fCi"] = "mBq",
["pCi"] = "Bq",
["nCi"] = "Bq",
["μCi"] = "kBq",
["mCi"] = "MBq",
["kCi"] = "TBq",
["MCi"] = "PBq",
["ns"] = "μs",
["μs"] = "ms",
["ms"] = "s",
["ks"] = "h",
["Ms"] = "week",
["Gs"] = "decade",
["Ts"] = "millennium",
["Ps"] = "million year",
["Es"] = "thousand million year",
["MK"] = "keVT",
["cL"] = "impoz usoz",
["cl"] = "impoz usoz",
["cm<sup>3</sup>"] = "cuin",
["dL"] = "impoz usoz",
["dl"] = "impoz usoz",
["mm<sup>3</sup>"] = "cuin",
["dm<sup>3</sup>"] = "cuin",
["e12cuft"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3",
["e12impgal"] = "v * 4.54609 < 1000 ! T ! P ! l",
["e12m3"] = "v < 28.316846592 ! T ! P ! cuft",
["e12U.S.gal"] = "v * 3.785411784 < 1000 ! T ! P ! l",
["e12USgal"] = "v * 3.785411784 < 1000 ! T ! P ! l",
["e15cuft"] = "v * 2.8316846592 < 100 ! e12 ! e15 ! m3",
["e15m3"] = "Pcuft",
["e3bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3",
["e3cuft"] = "v * 2.8316846592 < 100 ! ! e3 ! m3",
["e3impgal"] = "v * 4.54609 < 1000 ! k ! M ! l",
["e3m3"] = "v < 28.316846592 ! k ! M ! cuft",
["e3U.S.gal"] = "v * 3.785411784 < 1000 ! k ! M ! l",
["e3USgal"] = "v * 3.785411784 < 1000 ! k ! M ! l",
["e6bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3",
["e6cuft"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3",
["e6cuyd"] = "v * 7.64554857984 < 10 ! e3 ! e6 ! m3",
["e6impgal"] = "v * 4.54609 < 1000 ! M ! G ! l",
["e6L"] = "USgal",
["e6m3"] = "v < 28.316846592 ! M ! G ! cuft",
["e6U.S.gal"] = "v * 3.785411784 < 1000 ! M ! G ! l",
["e6USgal"] = "v * 3.785411784 < 1000 ! M ! G ! l",
["e9bdft"] = "v * 0.23597372167 < 100 ! e6 ! e9 ! m3",
["e9cuft"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3",
["e9impgal"] = "v * 4.54609 < 1000 ! G ! T ! l",
["e9m3"] = "v < 28.316846592 ! G ! T ! cuft",
["e9U.S.gal"] = "v * 3.785411784 < 1000 ! G ! T ! l",
["e9USgal"] = "v * 3.785411784 < 1000 ! G ! T ! l",
["GL"] = "cuft",
["Gl"] = "cuft",
["kL"] = "cuft",
["kl"] = "cuft",
["km<sup>3</sup>"] = "cumi",
["mL"] = "impoz usoz",
["ml"] = "impoz usoz",
["Ml"] = "v < 28.316846592 ! e3 ! e6 ! cuft",
["ML"] = "v < 28.316846592 ! e3 ! e6 ! cuft",
["TL"] = "cumi",
["Tl"] = "cumi",
["μL"] = "cuin",
["μl"] = "cuin",
}
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local link_exceptions = {
-- Prefixed units with a linked article different from that of the base unit.
-- Each key item is a prefixed symbol (not unitcode).
["mm<sup>2</sup>"] = "Square millimetre",
["cm<sup>2</sup>"] = "Square centimetre",
["dm<sup>2</sup>"] = "Square decimetre",
["km<sup>2</sup>"] = "Square kilometre",
["kJ"] = "Kilojoule",
["MJ"] = "Megajoule",
["GJ"] = "Gigajoule",
["TJ"] = "Terajoule",
["fm"] = "Femtometre",
["pm"] = "Picometre",
["nm"] = "Nanometre",
["μm"] = "Micrometre",
["mm"] = "Millimetre",
["cm"] = "Centimetre",
["dm"] = "Decimetre",
["dam"] = "Decametre",
["hm"] = "Hectometre",
["km"] = "Kilometre",
["Mm"] = "Megametre",
["Gm"] = "Gigametre",
["Tm"] = "Terametre",
["Pm"] = "Petametre",
["Em"] = "Exametre",
["Zm"] = "Zettametre",
["Ym"] = "Yottametre",
["μg"] = "Microgram",
["mg"] = "Milligram",
["kg"] = "Kilogram",
["Mg"] = "Tonne",
["yW"] = "Yoctowatt",
["zW"] = "Zeptowatt",
["aW"] = "Attowatt",
["fW"] = "Femtowatt",
["pW"] = "Picowatt",
["nW"] = "Nanowatt",
["μW"] = "Microwatt",
["mW"] = "Milliwatt",
["kW"] = "Kilowatt",
["MW"] = "Megawatt",
["GW"] = "Gigawatt",
["TW"] = "Terawatt",
["PW"] = "Petawatt",
["EW"] = "Exawatt",
["ZW"] = "Zettawatt",
["YW"] = "Yottawatt",
["as"] = "Attosecond",
["fs"] = "Femtosecond",
["ps"] = "Picosecond",
["ns"] = "Nanosecond",
["μs"] = "Microsecond",
["ms"] = "Millisecond",
["ks"] = "Kilosecond",
["Ms"] = "Megasecond",
["Gs"] = "Gigasecond",
["Ts"] = "Terasecond",
["Ps"] = "Petasecond",
["Es"] = "Exasecond",
["Zs"] = "Zettasecond",
["Ys"] = "Yottasecond",
["mm<sup>3</sup>"] = "Cubic millimetre",
["cm<sup>3</sup>"] = "Cubic centimetre",
["dm<sup>3</sup>"] = "Cubic decimetre",
["dam<sup>3</sup>"] = "Cubic decametre",
["km<sup>3</sup>"] = "Cubic kilometre",
["μL"] = "Microlitre",
["μl"] = "Microlitre",
["mL"] = "Millilitre",
["ml"] = "Millilitre",
["cL"] = "Centilitre",
["cl"] = "Centilitre",
["dL"] = "Decilitre",
["dl"] = "Decilitre",
["daL"] = "Decalitre",
["dal"] = "Decalitre",
["hL"] = "Hectolitre",
["hl"] = "Hectolitre",
["kL"] = "Kilolitre",
["kl"] = "Kilolitre",
["ML"] = "Megalitre",
["Ml"] = "Megalitre",
["GL"] = "Gigalitre",
["Gl"] = "Gigalitre",
["TL"] = "Teralitre",
["Tl"] = "Teralitre",
["PL"] = "Petalitre",
["Pl"] = "Petalitre",
}
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local per_unit_fixups = {
-- Automatically created per units of form "x/y" may have their unit type
-- changed, for example, "length/time" is changed to "speed".
-- Other adjustments can also be specified.
["/area"] = "per unit area",
["/volume"] = "per unit volume",
["area/area"] = "area per unit area",
["energy/length"] = "energy per unit length",
["energy/mass"] = "energy per unit mass",
["energy/time"] = { utype = "power", link = "Power (physics)" },
["energy/volume"] = "energy per unit volume",
["force/area"] = { utype = "pressure", link = "Pressure" },
["length/length"] = { utype = "gradient", link = "Grade (slope)" },
["length/time"] = { utype = "speed", link = "Speed" },
["length/time/time"] = { utype = "acceleration", link = "Acceleration" },
["mass/area"] = { utype = "pressure", multiplier = 9.80665 },
["mass/length"] = "linear density",
["mass/mass"] = "concentration",
["mass/power"] = "mass per unit power",
["mass/time"] = "mass per unit time",
["mass/volume"] = { utype = "density", link = "Density" },
["power/mass"] = "power per unit mass",
["power/volume"] = { link = "Power density" },
["pressure/length"] = "fracture gradient",
["speed/time"] = { utype = "acceleration", link = "Acceleration" },
["volume/area"] = "volume per unit area",
["volume/length"] = "volume per unit length",
["volume/time"] = "flow",
}
return {
all_units = all_units,
default_exceptions = default_exceptions,
link_exceptions = link_exceptions,
per_unit_fixups = per_unit_fixups,
}
