Directory:Airpurafiers USA/Mold

Airpura Air Purifiers for Mold Control

A significant Health Hazard mold presents a double threat to health.

Mold produces spore particles and toxic gas.

The best solution is to have the source of the mold removed.

However, if this has not happened yet or is not particle an air purifier may help.

Airpura's UV 600 air purifier with ultra violet lamp is a good choice for controlling mold.

The Ultra Violet lamp will kill mold spores by destroying their DNA.

The UV600 has a 2 inch deep 18 lb. carbon filter for adsorbing airborne chemicals and odors. A 40 sq. ft. HEPA filter captures airborne particles as small as .3 microns with 99.97% efficiency.

Mold spores are larger than .3 microns.

Mold will not grow inside the air purifier.

Air enters from all sides and exits from the top.

This provides 360° all around air intake and distribution.

This airflow avoids noisy turbulence associated with many air purifiers.

The UV600 has a variable speed motor. You may fine tune noise by dialing the speed.

This is helpful at night. In the bedroom, run the UV600 on high for an hour before bedtime.

Then dial the speed to a comfortable noise level for sleeping. The UV600 will maintain the air quality while you sleep.

The UV600 delivers 350 cubic feet of clean air per minute on its highest speed.

This will clean the air volume in a 600 sq. ft. room with 9 foot ceiling 4 times per hour.

Directory:Airpurafiers USA/Mold

External links